This target is only valid in the
.B nat
table, in the
.B PREROUTING
and
.B OUTPUT
chains, and user-defined chains which are only called from those
chains.  It specifies that the destination address of the packet
should be modified (and all future packets in this connection will
also be mangled), and rules should cease being examined.  It takes the
following options:
.TP
\fB\-\-to\-destination\fP [\fIipaddr\fP[\fB\-\fP\fIipaddr\fP]][\fB:\fP\fIport\fP[\fB\-\fP\fIport\fP[\fB/\fIbaseport\fP]]]
which can specify a single new destination IP address, an inclusive
range of IP addresses. Optionally a port range,
if the rule also specifies one of the following protocols:
\fBtcp\fP, \fBudp\fP, \fBdccp\fP or \fBsctp\fP.
If no port range is specified, then the destination port will never be
modified. If no IP address is specified then only the destination port
will be modified.
If \fBbaseport\fP is given, the difference of the original destination port and
its value is used as offset into the mapping port range. This allows one to create
shifted portmap ranges and is available since kernel version 4.18.
For a single port or \fIbaseport\fP, a service name as listed in
\fB/etc/services\fP may be used.
.TP
\fB\-\-random\fP
Randomize source port mapping (kernel >= 2.6.22).
.TP
\fB\-\-persistent\fP
Gives a client the same source-/destination-address for each connection.
This supersedes the SAME target. Support for persistent mappings is available
from 2.6.29-rc2.
.TP
IPv6 support available since Linux kernels >= 3.7.