From 079ea12a24d7a7fe000ccee4f20a6b922f400aa4 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Mon, 18 Jun 2018 10:23:23 +0200 Subject: doc: libnftables-json: Review asciidoc syntax This changes asciidoc markup according to a few best practices recommended in [1] and a quick review of html output: * Use atx-style headings everywhere apart from the document title. This requires to explicitly disable compat-mode after the latter. * Use only the minimum number of dashes for listings. * Enclose verses with empty lines in a verse block instead of having multiple verses for it. * Indent continued lines in synopsis for added readability. [1] https://asciidoctor.org/docs/asciidoc-recommended-practices/ Signed-off-by: Phil Sutter Signed-off-by: Pablo Neira Ayuso --- doc/libnftables-json.adoc | 326 ++++++++++++++++++++-------------------------- 1 file changed, 142 insertions(+), 184 deletions(-) (limited to 'doc') diff --git a/doc/libnftables-json.adoc b/doc/libnftables-json.adoc index e993fedc..ce1d3af8 100644 --- a/doc/libnftables-json.adoc +++ b/doc/libnftables-json.adoc @@ -2,14 +2,12 @@ libnftables-json(5) =================== Phil Sutter :doctype: manpage +:compat-mode!: -NAME ----- +== NAME libnftables-json - Supported JSON schema by libnftables -SYNOPSIS --------- - +== SYNOPSIS *{ "nftables": [* 'OBJECTS' *] }* 'OBJECTS' := 'LIST_OBJECTS' | 'CMD_OBJECTS' @@ -20,8 +18,8 @@ SYNOPSIS 'CMD_OBJECT' := *{* 'CMD'*:* 'LIST_OBJECT' *}* -'CMD' := *"add"* | *"replace"* | *"create"* | *"insert"* | *"delete"* | *"list"* -| *"reset"* | *"flush"* | *"rename"* +'CMD' := *"add"* | *"replace"* | *"create"* | *"insert"* | *"delete"* | + *"list"* | *"reset"* | *"flush"* | *"rename"* 'LIST_OBJECT' := 'TABLE' | 'CHAIN' | 'RULE' | 'SET' | 'MAP' | 'ELEMENT' | 'FLOWTABLE' | 'COUNTER' | 'QUOTA' | 'CT_HELPER' | 'LIMIT' @@ -40,8 +38,7 @@ SYNOPSIS 'HANDLE' := *"handle":* 'NUMBER' -DESCRIPTION ------------ +== DESCRIPTION libnftables supports JSON formatted input and output. This is implemented as an alternative frontend to the standard CLI syntax parser, therefore basic behaviour is identical and for (almost) any operation available in standard @@ -54,8 +51,7 @@ of *nft_run_cmd_from_filename()* function. JSON output has to be enabled via *nft_ctx_output_set_json()* function, turning library standard output into JSON format. Error output remains unaffected. -GLOBAL STRUCTURE ----------------- +== GLOBAL STRUCTURE In general, any JSON input or output is enclosed in an object with a single property named 'nftables'. It's value is an array containing commands (for input) or ruleset elements (for output). @@ -65,55 +61,52 @@ It's value is a ruleset element - basically identical to output elements apart from certain properties which may be interpreted differently or are required when output generally omits them. -COMMAND OBJECTS ---------------- +== COMMAND OBJECTS The structure accepts an arbitrary amount of commands which are interpreted in order of appearance. For instance, the following standard syntax input: ------------------------------------------------------------------------- +---- flush ruleset add table inet mytable list ruleset ------------------------------------------------------------------------- +---- translates into JSON as such: ------------------------------------------------------------------------- +---- { "nftables": [ { "flush": { "ruleset": null }}, { "add": { "table": { "family": "inet", "name": "mytable" }}}, { "list": { "ruleset": null }} ]} ------------------------------------------------------------------------- - -ADD -~~~ +---- +=== ADD +[verse] +____ *{ "add":* 'ADD_OBJECT' *}* 'ADD_OBJECT' := 'TABLE' | 'CHAIN' | 'RULE' | 'SET' | 'MAP' | 'ELEMENT' | -'FLOWTABLE' | 'COUNTER | QUOTA' | 'CT_HELPER' | 'LIMIT' + 'FLOWTABLE' | 'COUNTER | QUOTA' | 'CT_HELPER' | 'LIMIT' +____ Add a new ruleset element to the kernel. -REPLACE -~~~~~~~ - +=== REPLACE +[verse] *{ "replace":* 'RULE' *}* Replace a rule. In 'RULE', *handle* property is mandatory and identifies the rule to be replaced. -CREATE -~~~~~~ - +=== CREATE +[verse] *{ "create":* 'ADD_OBJECT' *}* Identical to *add* command, but returns an error if the object already exists. -INSERT -~~~~~~ - +=== INSERT +[verse] *{ "insert":* 'RULE' *}* This command is identical to *add* for rules, but instead of appending the rule @@ -121,9 +114,8 @@ to the chain by default, it inserts at first position. If a *handle* or *index* property is given, the rule is inserted before the rule identified by those properties. -DELETE -~~~~~~ - +=== DELETE +[verse] *{ "delete":* 'ADD_OBJECT' *}* Delete an object from the ruleset. Only the minimal number of properties @@ -131,49 +123,51 @@ required to uniquely identify an object is generally needed in 'ADD_OBJECT'. For most ruleset elements this is *family* and *table* plus either *handle* or *name* (except rules since they don't have a name). -LIST -~~~~ - +=== LIST +[verse] +____ *{ "list":* 'LIST_OBJECT' *}* 'LIST_OBJECT' := 'TABLE' | 'TABLES' | 'CHAIN' | 'CHAINS' | 'SET' | 'SETS' | -'MAP' | 'MAPS | COUNTER' | 'COUNTERS' | 'QUOTA' | 'QUOTAS' | 'CT_HELPER' | -'CT_HELPERS' | 'LIMIT' | 'LIMITS | RULESET' | 'METER' | 'METERS' | 'FLOWTABLES' + 'MAP' | 'MAPS | COUNTER' | 'COUNTERS' | 'QUOTA' | 'QUOTAS' | + 'CT_HELPER' | 'CT_HELPERS' | 'LIMIT' | 'LIMITS | RULESET' | + 'METER' | 'METERS' | 'FLOWTABLES' +____ List ruleset elements. The plural forms are used to list all objects of that kind, optionally filtered by *family* and for some, also *table*. -RESET -~~~~~ - +=== RESET +[verse] +____ *{ "reset":* 'RESET_OBJECT' *}* 'RESET_OBJECT' := 'COUNTER' | 'COUNTERS' | 'QUOTA' | 'QUOTAS' +____ Reset state in suitable objects, i.e. zero their internal counter. -FLUSH -~~~~~ - +=== FLUSH +[verse] +____ *{ "flush":* 'FLUSH_OBJECT' *}* 'FLUSH_OBJECT' := 'TABLE' | 'CHAIN' | 'SET' | 'MAP' | 'METER' | 'RULESET' +____ Empty contents in given object, e.g. remove all chains from given *table* or remove all elements from given *set*. -RENAME -~~~~~~ +=== RENAME +[verse] *{ "rename":* 'CHAIN' *}* Rename a chain. The new name is expected in a dedicated property named *newname*. -RULESET ELEMENTS ----------------- +== RULESET ELEMENTS -TABLE -~~~~~ +=== TABLE [verse] *{ "table": "family":* 'STRING'*, @@ -191,8 +185,7 @@ This object describes a table. The table's handle. In input, used only in *delete* command as alternative to *name*. -CHAIN -~~~~~ +=== CHAIN [verse] *{ "chain": "family":* 'STRING'*, @@ -234,9 +227,9 @@ The following properties are required for base chains: *policy*:: The chain's policy. -RULE -~~~~ +=== RULE [verse] +____ *{ "rule": "family":* 'STRING'*, "table":* 'STRING'*, @@ -247,8 +240,8 @@ RULE "comment":* 'STRING' *}* -[verse] 'STATEMENTS' := 'STATEMENT' [*,* 'STATEMENTS' ] +____ This object describes a rule. Basic building blocks of rules are statements, each rule consists of at least a single one. @@ -272,9 +265,9 @@ each rule consists of at least a single one. *comment*:: Optional rule comment. -SET / MAP -~~~~~~~~~ +=== SET / MAP [verse] +____ *{ "set": "family":* 'STRING'*, "table":* 'STRING'*, @@ -289,7 +282,6 @@ SET / MAP "size":* 'NUMBER' *}* -[verse] *{ "map": "family":* 'STRING'*, "table":* 'STRING'*, @@ -305,7 +297,6 @@ SET / MAP "size":* 'NUMBER' *}* -[verse] 'SET_TYPE' := 'STRING' | *[* 'SET_TYPE_LIST' *]* 'SET_TYPE_LIST' := 'STRING' [*,* 'SET_TYPE_LIST' ] 'SET_POLICY' := *"performance"* | *"memory"* @@ -313,6 +304,7 @@ SET / MAP 'SET_FLAG' := *"constant"* | *"interval"* | *"timeout"* 'SET_ELEMENTS' := 'EXPRESSION' | *[* 'EXPRESSION_LIST' *]* 'EXPRESSION_LIST' := 'EXPRESSION' [*,* 'EXPRESSION_LIST' ] +____ These objects describe a named set or map. Maps are a special form of sets in that they translate a unique key to a value. @@ -342,22 +334,20 @@ that they translate a unique key to a value. *size*:: Maximum number of elements supported. -TYPE -^^^^ +==== TYPE The set type might be a string, such as *"ipv4_addr"* or an array consisting of strings (for concatenated types). -ELEM -^^^^ +==== ELEM A single set element might be given as string, integer or boolean value for simple cases. If additional properties are required, a formal *elem* object may be used. Multiple elements may be given in an array. -ELEMENT -~~~~~~~ +=== ELEMENT [verse] +____ *{ "element": "family":* 'STRING'*, "table":* 'STRING'*, @@ -365,9 +355,9 @@ ELEMENT "elem":* 'SET_ELEM' *}* -[verse] 'SET_ELEM' := 'EXPRESSION' | *[* 'EXPRESSION_LIST' *]* 'EXPRESSION_LIST' := 'EXPRESSION' [*,* 'EXPRESSION' ] +____ Manipulate element(s) in a named set. @@ -380,9 +370,9 @@ Manipulate element(s) in a named set. *elem*:: See elem property of set object. -FLOWTABLE -~~~~~~~~~ +=== FLOWTABLE [verse] +____ *{ "flowtable": "family":* 'STRING'*, "table":* 'STRING'*, @@ -392,9 +382,9 @@ FLOWTABLE "dev":* 'FT_INTERFACE' *}* -[verse] 'FT_INTERFACE' := 'STRING' | *[* 'FT_INTERFACE_LIST' *]* 'FT_INTERFACE_LIST' := 'STRING' [*,* 'STRING' ] +____ This object represents a named flowtable. @@ -411,8 +401,7 @@ This object represents a named flowtable. *dev*:: The flow table's interface(s). -COUNTER -~~~~~~~ +=== COUNTER [verse] *{ "counter": "family":* 'STRING'*, @@ -438,8 +427,7 @@ This object represents a named counter. *bytes*:: Byte counter value. -QUOTA -~~~~~ +=== QUOTA [verse] *{ "quota": "family":* 'STRING'*, @@ -468,9 +456,9 @@ This object represents a named quota. *inv*:: If true, match if quota exceeded. -CT HELPER -~~~~~~~~~ +=== CT HELPER [verse] +____ *{ "ct helper": "family":* 'STRING'*, "table":* 'STRING'*, @@ -481,8 +469,8 @@ CT HELPER "l3proto":* 'STRING' *}* -[verse] 'CTH_PROTO' := *"tcp"* | *"udp"* +____ This object represents a named conntrack helper. @@ -501,9 +489,9 @@ This object represents a named conntrack helper. *l3proto*:: The ct helper's layer 3 protocol, e.g. *"ip"* or *"ip6"*. -LIMIT -~~~~~ +=== LIMIT [verse] +____ *{ "limit": "family":* 'STRING'*, "table":* 'STRING'*, @@ -517,6 +505,7 @@ LIMIT *}* 'LIMIT_UNIT' := *"packets"* | *"bytes"* +____ This object represents a named limit. @@ -540,13 +529,11 @@ This object represents a named limit. *inv*:: If true, match if limit was exceeded. If omitted, defaults to *false*. -STATEMENTS ----------- +== STATEMENTS Statements are the building blocks for rules. Each rule consists of at least a single statement. -VERDICT -~~~~~~~ +=== VERDICT [verse] *{ "accept": null }* *{ "drop": null }* @@ -560,8 +547,7 @@ delegates to a different one. *jump* and *goto* statements expect a target chain name as value. -MATCH -~~~~~ +=== MATCH [verse] *{ "match": "left":* 'EXPRESSION'*, @@ -581,8 +567,7 @@ processing continues with the next rule in the same chain. *op*:: Operator indicating the type of comparison. -OPERATORS -^^^^^^^^^ +==== OPERATORS The operator is usually optional and if omitted usually defaults to "==". Allowed operators are: @@ -599,16 +584,16 @@ Allowed operators are: *<=*:: Less than or equal to *>=*:: Greater than or equal to -COUNTER -~~~~~~~ +=== COUNTER [verse] +____ *{ "counter": "packets":* 'NUMBER'*, "bytes":* 'NUMBER' *}* -[verse] *{ "counter":* 'STRING' *}* +____ This object represents a byte/packet counter. In Input, no properties are required. If given, they act as initial values for the counter. @@ -621,8 +606,7 @@ in. The second form specifies a reference to a named counter object. *bytes*:: Bytes counted. -MANGLE -~~~~~~ +=== MANGLE [verse] *{ "mangle": "left":* 'EXPRESSION'*, @@ -636,9 +620,9 @@ Change packet data or meta info. *right*:: Value to change data to. -QUOTA -~~~~~ +=== QUOTA [verse] +____ *{ "quota": "val":* 'NUMBER'*, "val_unit":* 'STRING'*, @@ -647,8 +631,8 @@ QUOTA "inv":* 'BOOLEAN' *}* -[verse] *{ "quota":* 'STRING' *}* +____ The first form creates an anonymous quota which lives in the rule it appears in. The second form specifies a reference to a named quota object. @@ -665,9 +649,9 @@ The second form specifies a reference to a named quota object. *inv*:: If *true*, will match if quota was exceeded. Defaults to *false*. -LIMIT -~~~~~ +=== LIMIT [verse] +____ *{ "limit": "rate":* 'NUMBER'*, "rate_unit":* 'STRING'*, @@ -677,8 +661,8 @@ LIMIT "inv":* 'BOOLEAN' *}* -[verse] *{ "limit":* 'STRING' *}* +____ The first form creates an anonymous limit which lives in the rule it appears in. The second form specifies a reference to a named limit object. @@ -697,17 +681,17 @@ The second form specifies a reference to a named limit object. *inv*:: If *true*, matches if limit was exceeded. Defaults to *false*. -FWD -~~~ +=== FWD [verse] +____ *{ "fwd": "dev":* 'EXPRESSION'*, "family":* 'FWD_FAMILY'*, "addr":* 'EXPRESSION' *}* -[verse] 'FWD_FAMILY' := *"ip"* | *"ip6"* +____ Forward a packet to a different destination. @@ -720,15 +704,13 @@ Forward a packet to a different destination. Both *family* and *addr* are optional, but if given both need to be present. -NOTRACK -~~~~~~~ +=== NOTRACK [verse] *{ "notrack": null }* Disable connection tracking for the packet. -DUP -~~~ +=== DUP [verse] *{ "dup": "addr":* 'EXPRESSION'*, @@ -743,38 +725,35 @@ Duplicate a packet to a different destination. Interface to duplicate packet to. May be omitted to not specify an interface explicitly. -NETWORK ADDRESS TRANSLATION -~~~~~~~~~~~~~~~~~~~~~~~~~~~ +=== NETWORK ADDRESS TRANSLATION [verse] +____ *{ "snat": "addr":* 'EXPRESSION'*, "port":* 'EXPRESSION'*, "flags":* 'FLAGS' *}* -[verse] *{ "dnat": "addr":* 'EXPRESSION'*, "port":* 'EXPRESSION'*, "flags":* 'FLAGS' *}* -[verse] *{ "masquerade": "port":* 'EXPRESSION'*, "flags":* 'FLAGS' *}* -[verse] *{ "redirect": "port":* 'EXPRESSION'*, "flags":* 'FLAGS' *}* -[verse] 'FLAGS' := 'FLAG' | *[* 'FLAG_LIST' *]* 'FLAG_LIST' := 'FLAG' [*,* 'FLAG_LIST' ] 'FLAG' := *"random"* | *"fully-random"* | *"persistent"* +____ Perform Network Address Translation. @@ -787,8 +766,7 @@ Perform Network Address Translation. All properties are optional and default to none. -REJECT -~~~~~~ +=== REJECT [verse] *{ "reject": "type":* 'STRING'*, @@ -804,8 +782,7 @@ Reject the packet and send the given error reply. All properties are optional. -SET -~~~ +=== SET [verse] *{ "set": "op":* 'STRING'*, @@ -822,9 +799,9 @@ Dynamically add/update elements to a set. *set*:: Set reference. -LOG -~~~ +=== LOG [verse] +____ *{ "log": "prefix":* 'STRING'*, "group":* 'NUMBER'*, @@ -834,15 +811,14 @@ LOG "flags":* 'FLAGS' *}* -[verse] 'LEVEL' := *"emerg"* | *"alert"* | *"crit"* | *"err"* | *"warn"* | *"notice"* | -*"info"* | *"debug"* | *"audit"* + *"info"* | *"debug"* | *"audit"* -[verse] 'FLAGS' := 'FLAG' | *[* 'FLAG_LIST' *]* 'FLAG_LIST' := 'FLAG' [*,* 'FLAG_LIST' ] 'FLAG' := *"tcp sequence"* | *"tcp options"* | *"ip options"* | *"skuid"* | -*"ether"* | *"all"* + *"ether"* | *"all"* +____ Log the packet. @@ -861,8 +837,7 @@ Log the packet. All properties are optional. -CT HELPER -~~~~~~~~~ +=== CT HELPER [verse] *{ "ct helper":* 'EXPRESSION' *}* @@ -871,8 +846,7 @@ Enable specified conntrack helper for this packet. *ct helper*:: CT helper reference. -METER -~~~~~ +=== METER [verse] *{ "meter": "name":* 'STRING'*, @@ -889,18 +863,18 @@ Apply given statement using a meter. *stmt*:: Meter statement. -QUEUE -~~~~~ +=== QUEUE [verse] +____ *{ "queue": "num":* 'EXPRESSION'*, "flags":* 'FLAGS' *}* -[verse] 'FLAGS' := 'FLAG' | *[* 'FLAG_LIST' *]* 'FLAG_LIST' := 'FLAG' [*,* 'FLAG_LIST' ] 'FLAG' := *"bypass"* | *"fanout"* +____ Queue the packet to userspace. @@ -909,8 +883,7 @@ Queue the packet to userspace. *flags*:: Queue flags. -VERDICT MAP -~~~~~~~~~~~ +=== VERDICT MAP [verse] *{ "vmap": "left":* 'EXPRESSION'*, @@ -924,8 +897,7 @@ Apply a verdict conditionally. *right*:: Mapping expression consisting of value/verdict pairs. -CT COUNT -~~~~~~~~ +=== CT COUNT [verse] *{ "ct count": "val":* 'NUMBER'*, @@ -940,14 +912,12 @@ Limit number of connections using conntrack. If *true*, match if *val* was exceeded. If omitted, defaults to *false*. -EXPRESSIONS ------------ +== EXPRESSIONS Expressions are the building blocks of (most) statements. In their most basic form, they are just immediate values represented as JSON string, integer or boolean types. -IMMEDIATES -~~~~~~~~~~ +=== IMMEDIATES [verse] 'STRING' 'NUMBER' @@ -961,38 +931,36 @@ are two special cases: *\**:: Construct a wildcard expression. -LISTS -~~~~~ +=== LISTS [verse] 'ARRAY' List expressions are constructed by plain arrays containing of an arbitrary number of expressions. -CONCAT -~~~~~~ +=== CONCAT [verse] +____ *{ "concat":* 'CONCAT' *}* -[verse] 'CONCAT' := *[* 'EXPRESSION_LIST' *]* 'EXPRESSION_LIST' := 'EXPRESSION' [*,* 'EXPRESSION_LIST' ] +____ Concatenate several expressions. -SET -~~~ +=== SET [verse] +____ *{ "set":* 'SET' *}* -[verse] 'SET' := 'EXPRESSION' | *[* 'EXPRESSION_LIST' *]* +____ This object constructs an anonymous set. For mappings, an array of arrays with exactly two elements is expected. -MAP -~~~ +=== MAP [verse] *{ "map": "left":* 'EXPRESSION'*, @@ -1006,8 +974,7 @@ Map a key to a value. *right*:: Mapping expression consisting of value/target pairs. -PREFIX -~~~~~~ +=== PREFIX [verse] *{ "prefix": "addr":* 'EXPRESSION'*, @@ -1017,17 +984,16 @@ PREFIX Construct an IPv4 or IPv6 prefix consisting of address part in *addr* and prefix length in *len*. -RANGE -~~~~~ +=== RANGE [verse] *{ "range": [* 'EXPRESSION' *,* 'EXPRESSION' *] }* Construct a range of values. The first array item denotes the lower boundary, the second one the upper boundary. -PAYLOAD -~~~~~~~ +=== PAYLOAD [verse] +____ *{ "payload": "name": "raw", "base":* 'BASE'*, @@ -1035,14 +1001,13 @@ PAYLOAD "len":* 'NUMBER' *}* -[verse] *{ "payload": "name":* 'STRING'*, "field":* 'STRING' *}* -[verse] 'BASE' := *"ll"* | *"nh"* | *"th"* +____ Construct a payload expression, i.e. a reference to a certain part of packet data. The first form creates a raw payload expression to point at a random @@ -1058,8 +1023,7 @@ point (*base*). Following *base* values are accepted: The second form allows to reference a field by name (*field*) in a named packet header (*name*). -EXTHDR -~~~~~~ +=== EXTHDR [verse] *{ "exthdr": "name":* 'STRING'*, @@ -1073,8 +1037,7 @@ Create a reference to a field (*field*) in an IPv6 extension header (*name*). If *field* property is not given, expression is to be used as header existence check in a *match* statement with boolean on right hand side. -TCP OPTION -~~~~~~~~~~ +=== TCP OPTION [verse] *{ "tcp option": "name":* 'STRING'*, @@ -1086,66 +1049,65 @@ Create a reference to a field (*field*) of a TCP option header (*name*). If *field* property is not given, expression is to be used as TCP option existence check in a *match* statement with boolean on right hand side. -META -~~~~ +=== META [verse] *{ "meta":* 'STRING' *}* Create a reference to packet meta data. -RT -~~~ +=== RT [verse] +____ *{ "rt": "key":* 'RT_KEY'*, "family":* 'RT_FAMILY' *}* -[verse] 'RT_KEY' := *"classid"* | *"nexthop"* | *"mtu"* 'RT_FAMILY' := *"ip"* | *"ip6"* +____ Create a reference to packet routing data. The *family* property is optional and defaults to unspecified. -CT -~~~ +=== CT [verse] +____ *{ "ct": "key":* 'STRING'*, "family":* 'CT_FAMILY'*, "dir":* 'CT_DIRECTION' *}* -[verse] 'CT_FAMILY' := *"ip"* | *"ip6"* 'CT_DIRECTION' := *"original"* | *"reply"* +____ Create a reference to packet conntrack data. Some CT keys don't support a direction. In this case *dir* must not be given. -NUMGEN -~~~~~~ +=== NUMGEN [verse] +____ *{ "numgen": "mode":* 'NG_MODE'*, "mod":* 'NUMBER'*, "offset":* 'NUMBER' *}* -[verse] 'NG_MODE' := *"inc"* | *"random"* +____ Create a number generator. The *offset* property is optional and defaults to 0. -HASH -~~~~ +=== HASH [verse] +____ *{ "jhash": "mod":* 'NUMBER'*, "offset":* 'NUMBER'*, @@ -1153,36 +1115,34 @@ HASH "seed":* 'NUMBER' *}* -[verse] *{ "symhash": "mod":* 'NUMBER'*, "offset":* 'NUMBER' *}* +____ Hash packet data. The *offset* and *seed* properties are optional and default to 0. -FIB -~~~ +=== FIB [verse] +____ *{ "fib": "result":* 'FIB_RESULT'*, "flags":* 'FIB_FLAGS' *}* -[verse] 'FIB_RESULT' := *"oif"* | *"oifname"* | *"type"* -[verse] 'FIB_FLAGS' := 'FIB_FLAG' | *[* 'FIB_FLAG_LIST' *]* 'FIB_FLAG_LIST' := 'FIB_FLAG' [*,* 'FIB_FLAG_LIST' ] 'FIB_FLAG' := *"saddr"* | *"daddr"* | *"mark"* | *"iif"* | *"oif"* +____ Perform kernel Forwarding Information Base lookups. -BINARY OPERATION -~~~~~~~~~~~~~~~~ +=== BINARY OPERATION [verse] *{ "|": [* 'EXPRESSION'*,* 'EXPRESSION' *] }* *{ "^": [* 'EXPRESSION'*,* 'EXPRESSION' *] }* @@ -1194,8 +1154,7 @@ All binary operations expect an array of exactly two expressions of which the first element denotes the left hand side and the second one the right hand side. -VERDICT -~~~~~~~ +=== VERDICT [verse] *{ "continue": null }* *{ "break": null }* @@ -1210,8 +1169,7 @@ Same as *verdict* statement, but for use in verdict maps. Only *jump* and *goto* verdicts expect a string denoting the target chain name. -ELEM -~~~~ +=== ELEM [verse] *{ "elem": "val":* 'EXPRESSION'*, @@ -1223,14 +1181,14 @@ ELEM Explicit set element object, in case *timeout*, *expires* or *comment* are desired. Otherwise may be replaced by the value of *val*. -SOCKET -~~~~~~ +=== SOCKET [verse] +____ *{ "socket": "key":* 'SOCKET_KEY' *}* -[verse] 'SOCKET_KEY' := *"transparent"* +____ Construct a reference to packet's socket. -- cgit v1.2.3