nft(8) ====== NAME ---- nft - Administration tool of the nftables framework for packet filtering and classification SYNOPSIS -------- [verse] *nft* [ *-nNscaeSupyjt* ] [ *-I* 'directory' ] [ *-f* 'filename' | *-i* | 'cmd' ...] *nft* *-h* *nft* *-v* DESCRIPTION ----------- nft is the command line tool used to set up, maintain and inspect packet filtering and classification rules in the Linux kernel, in the nftables framework. The Linux kernel subsystem is known as nf_tables, and `nf' stands for Netfilter. OPTIONS ------- For a full summary of options, run *nft --help*. *-h*:: *--help*:: Show help message and all options. *-v*:: *--version*:: Show version. *-n*:: *--numeric*:: Print fully numerical output. *-s*:: *--stateless*:: Omit stateful information of rules and stateful objects. *-N*:: *--reversedns*:: Translate IP address to names via reverse DNS lookup. This may slow down your listing since it generates network traffic. *-S*:: *--service*:: Translate ports to service names as defined by /etc/services. *-u*:: *--guid*:: Translate numeric UID/GID to names as defined by /etc/passwd and /etc/group. *-p*:: *--numeric-protocol*:: Display layer 4 protocol numerically. *-y*:: *--numeric-priority*:: Display base chain priority numerically. *-c*:: *--check*:: Check commands validity without actually applying the changes. *-a*:: *--handle*:: Show object handles in output. *-e*:: *--echo*:: When inserting items into the ruleset using *add*, *insert* or *replace* commands, print notifications just like *nft monitor*. *-j*:: *--json*:: Format output in JSON. See libnftables-json(5) for a schema description. *-I*:: *--includepath directory*:: Add the directory 'directory' to the list of directories to be searched for included files. This option may be specified multiple times. *-f*:: *--file 'filename'*:: Read input from 'filename'. If 'filename' is -, read from stdin. *-i*:: *--interactive*:: Read input from an interactive readline CLI. You can use quit to exit, or use the EOF marker, normally this is CTRL-D. *-T*:: *--numeric-time*:: Show time, day and hour values in numeric format. *-t*:: *--terse*:: Omit contents of sets from output. INPUT FILE FORMATS ------------------ LEXICAL CONVENTIONS ~~~~~~~~~~~~~~~~~~~ Input is parsed line-wise. When the last character of a line, just before the newline character, is a non-quoted backslash (\), the next line is treated as a continuation. Multiple commands on the same line can be separated using a semicolon (;). + A hash sign (#) begins a comment. All following characters on the same line are ignored. + Identifiers begin with an alphabetic character (a-z,A-Z), followed zero or more alphanumeric characters (a-z,A-Z,0-9) and the characters slash (/), backslash (\), underscore (_) and dot (.). Identifiers using different characters or clashing with a keyword need to be enclosed in double quotes ("). INCLUDE FILES ~~~~~~~~~~~~~ [verse] *include* 'filename' Other files can be included by using the *include* statement. The directories to be searched for include files can be specified using the *-I*/*--includepath* option. You can override this behaviour either by prepending `./' to your path to force inclusion of files located in the current working directory (i.e. relative path) or / for file location expressed as an absolute path. + If *-I*/*--includepath* is not specified, then nft relies on the default directory that is specified at compile time. You can retrieve this default directory via *-h*/*--help* option. + Include statements support the usual shell wildcard symbols (\*,?,[]). Having no matches for an include statement is not an error, if wildcard symbols are used in the include statement. This allows having potentially empty include directories for statements like **include "/etc/firewall/rules/"**. The wildcard matches are loaded in alphabetical order. Files beginning with dot (.) are not matched by include statements. SYMBOLIC VARIABLES ~~~~~~~~~~~~~~~~~~ [verse] *define* 'variable' *=* 'expr' *$variable* Symbolic variables can be defined using the *define* statement. Variable references are expressions and can be used initialize other variables. The scope of a definition is the current block and all blocks contained within. .Using symbolic variables --------------------------------------- define int_if1 = eth0 define int_if2 = eth1 define int_ifs = { $int_if1, $int_if2 } filter input iif $int_ifs accept --------------------------------------- [[ADDRESS_FAMILIES]] ADDRESS FAMILIES ---------------- Address families determine the type of packets which are processed. For each address family, the kernel contains so called hooks at specific stages of the packet processing paths, which invoke nftables if rules for these hooks exist. [horizontal] *ip*:: IPv4 address family. *ip6*:: IPv6 address family. *inet*:: Internet (IPv4/IPv6) address family. *arp*:: ARP address family, handling IPv4 ARP packets. *bridge*:: Bridge address family, handling packets which traverse a bridge device. *netdev*:: Netdev address family, handling packets from ingress. All nftables objects exist in address family specific namespaces, therefore all identifiers include an address family. If an identifier is specified without an address family, the *ip* family is used by default. IPV4/IPV6/INET ADDRESS FAMILIES ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The IPv4/IPv6/Inet address families handle IPv4, IPv6 or both types of packets. They contain five hooks at different packet processing stages in the network stack. .IPv4/IPv6/Inet address family hooks [options="header"] |================== |Hook | Description |prerouting | All packets entering the system are processed by the prerouting hook. It is invoked before the routing process and is used for early filtering or changing packet attributes that affect routing. |input | Packets delivered to the local system are processed by the input hook. |forward | Packets forwarded to a different host are processed by the forward hook. |output | Packets sent by local processes are processed by the output hook. |postrouting | All packets leaving the system are processed by the postrouting hook. |=================== ARP ADDRESS FAMILY ~~~~~~~~~~~~~~~~~~ The ARP address family handles ARP packets received and sent by the system. It is commonly used to mangle ARP packets for clustering. .ARP address family hooks [options="header"] |================= |Hook | Description |input | Packets delivered to the local system are processed by the input hook. |output | Packets send by the local system are processed by the output hook. |================= BRIDGE ADDRESS FAMILY ~~~~~~~~~~~~~~~~~~~~~ The bridge address family handles Ethernet packets traversing bridge devices. The list of supported hooks is identical to IPv4/IPv6/Inet address families above. NETDEV ADDRESS FAMILY ~~~~~~~~~~~~~~~~~~~~ The Netdev address family handles packets from ingress. .Netdev address family hooks [options="header"] |================= |Hook | Description |ingress | All packets entering the system are processed by this hook. It is invoked before layer 3 protocol handlers and it can be used for early filtering and policing. |================= RULESET ------- [verse] {*list* | *flush*} *ruleset* ['family'] The *ruleset* keyword is used to identify the whole set of tables, chains, etc. currently in place in kernel. The following *ruleset* commands exist: [horizontal] *list*:: Print the ruleset in human-readable format. *flush*:: Clear the whole ruleset. Note that, unlike iptables, this will remove all tables and whatever they contain, effectively leading to an empty ruleset - no packet filtering will happen anymore, so the kernel accepts any valid packet it receives. It is possible to limit *list* and *flush* to a specific address family only. For a list of valid family names, see <> above. By design, *list ruleset* command output may be used as input to *nft -f*. Effectively, this is the nft-equivalent of *iptables-save* and *iptables-restore*. TABLES ------ [verse] {*add* | *create*} *table* ['family'] 'table' [*{ flags* 'flags' *; }*] {*delete* | *list* | *flush*} *table* ['family'] 'table' *list tables* ['family'] *delete table* ['family'] *handle* 'handle' Tables are containers for chains, sets and stateful objects. They are identified by their address family and their name. The address family must be one of *ip*, *ip6*, *inet*, *arp*, *bridge*, *netdev*. The *inet* address family is a dummy family which is used to create hybrid IPv4/IPv6 tables. The *meta expression nfproto* keyword can be used to test which family (ipv4 or ipv6) context the packet is being processed in. When no address family is specified, *ip* is used by default. The only difference between add and create is that the former will not return an error if the specified table already exists while *create* will return an error. .Table flags [options="header"] |================= |Flag | Description |dormant | table is not evaluated any more (base chains are unregistered). |================= .*Add, change, delete a table* --------------------------------------- # start nft in interactive mode nft --interactive # create a new table. create table inet mytable # add a new base chain: get input packets add chain inet mytable myin { type filter hook input priority 0; } # add a single counter to the chain add rule inet mytable myin counter # disable the table temporarily -- rules are not evaluated anymore add table inet mytable { flags dormant; } # make table active again: add table inet mytable --------------------------------------- [horizontal] *add*:: Add a new table for the given family with the given name. *delete*:: Delete the specified table. *list*:: List all chains and rules of the specified table. *flush*:: Flush all chains and rules of the specified table. CHAINS ------ [verse] {*add* | *create*} *chain* ['family'] 'table' 'chain' [*{ type* 'type' *hook* 'hook' [*device* 'device'] *priority* 'priority' *;* [*policy* 'policy' *;*] *}*] {*delete* | *list* | *flush*} *chain* ['family'] 'table' 'chain' *list chains* ['family'] *delete chain* ['family'] 'table' *handle* 'handle' *rename chain* ['family'] 'table' 'chain' 'newname' Chains are containers for rules. They exist in two kinds, base chains and regular chains. A base chain is an entry point for packets from the networking stack, a regular chain may be used as jump target and is used for better rule organization. [horizontal] *add*:: Add a new chain in the specified table. When a hook and priority value are specified, the chain is created as a base chain and hooked up to the networking stack. *create*:: Similar to the *add* command, but returns an error if the chain already exists. *delete*:: Delete the specified chain. The chain must not contain any rules or be used as jump target. *rename*:: Rename the specified chain. *list*:: List all rules of the specified chain. *flush*:: Flush all rules of the specified chain. For base chains, *type*, *hook* and *priority* parameters are mandatory. .Supported chain types [options="header"] |================= |Type | Families | Hooks | Description |filter | all | all | Standard chain type to use in doubt. |nat | ip, ip6, inet | prerouting, input, output, postrouting | Chains of this type perform Native Address Translation based on conntrack entries. Only the first packet of a connection actually traverses this chain - its rules usually define details of the created conntrack entry (NAT statements for instance). |route | ip, ip6 | output | If a packet has traversed a chain of this type and is about to be accepted, a new route lookup is performed if relevant parts of the IP header have changed. This allows to e.g. implement policy routing selectors in nftables. |================= Apart from the special cases illustrated above (e.g. *nat* type not supporting *forward* hook or *route* type only supporting *output* hook), there are two further quirks worth noticing: * The netdev family supports merely a single combination, namely *filter* type and *ingress* hook. Base chains in this family also require the *device* parameter to be present since they exist per incoming interface only. * The arp family supports only the *input* and *output* hooks, both in chains of type *filter*. The *priority* parameter accepts a signed integer value or a standard priority name which specifies the order in which chains with same *hook* value are traversed. The ordering is ascending, i.e. lower priority values have precedence over higher ones. Standard priority values can be replaced with easily memorizable names. Not all names make sense in every family with every hook (see the compatibility matrices below) but their numerical value can still be used for prioritizing chains. These names and values are defined and made available based on what priorities are used by xtables when registering their default chains. Most of the families use the same values, but bridge uses different ones from the others. See the following tables that describe the values and compatibility. .Standard priority names, family and hook compatibility matrix [options="header"] |================== | Name | Value | Families | Hooks | raw | -300 | ip, ip6, inet | all | mangle | -150 | ip, ip6, inet | all | dstnat | -100 | ip, ip6, inet | prerouting | filter | 0 | ip, ip6, inet, arp, netdev | all | security | 50 | ip, ip6, inet | all | srcnat | 100 | ip, ip6, inet | postrouting |=================== .Standard priority names and hook compatibility for the bridge family [option="header"] |================== | Name | Value | Hooks | dstnat | -300 | prerouting | filter | -200 | all | out | 100 | output | srcnat | 300 | postrouting |================== Basic arithmetic expressions (addition and subtraction) can also be achieved with these standard names to ease relative prioritizing, e.g. *mangle - 5* stands for *-155*. Values will also be printed like this until the value is not further than 10 form the standard value. Base chains also allow to set the chain's *policy*, i.e. what happens to packets not explicitly accepted or refused in contained rules. Supported policy values are *accept* (which is the default) or *drop*. RULES ----- [verse] {*add* | *insert*} *rule* ['family'] 'table' 'chain' [*handle* 'handle' | *index* 'index'] 'statement' ... [*comment* 'comment'] *replace rule* ['family'] 'table' 'chain' *handle* 'handle' 'statement' ... [*comment* 'comment'] *delete rule* ['family'] 'table' 'chain' *handle* 'handle' Rules are added to chains in the given table. If the family is not specified, the ip family is used. Rules are constructed from two kinds of components according to a set of grammatical rules: expressions and statements. The add and insert commands support an optional location specifier, which is either a 'handle' or the 'index' (starting at zero) of an existing rule. Internally, rule locations are always identified by 'handle' and the translation from 'index' happens in userspace. This has two potential implications in case a concurrent ruleset change happens after the translation was done: The effective rule index might change if a rule was inserted or deleted before the referred one. If the referred rule was deleted, the command is rejected by the kernel just as if an invalid 'handle' was given. A 'comment' is a single word or a double-quoted (") multi-word string which can be used to make notes regarding the actual rule. *Note:* If you use bash for adding rules, you have to escape the quotation marks, e.g. \"enable ssh for servers\". [horizontal] *add*:: Add a new rule described by the list of statements. The rule is appended to the given chain unless a location is specified, in which case the rule is inserted after the specified rule. *insert*:: Same as *add* except the rule is inserted at the beginning of the chain or before the specified rule. *replace*:: Similar to *add*, but the rule replaces the specified rule. *delete*:: Delete the specified rule. .*add a rule to ip table input chain* ------------- nft add rule filter output ip daddr 192.168.0.0/24 accept # 'ip filter' is assumed # same command, slightly more verbose nft add rule ip filter output ip daddr 192.168.0.0/24 accept -------------- .*delete rule from inet table* ----------------------- # nft -a list ruleset table inet filter { chain input { type filter hook input priority 0; policy accept; ct state established,related accept # handle 4 ip saddr 10.1.1.1 tcp dport ssh accept # handle 5 ... # delete the rule with handle 5 # nft delete rule inet filter input handle 5 ------------------------- SETS ---- nftables offers two kinds of set concepts. Anonymous sets are sets that have no specific name. The set members are enclosed in curly braces, with commas to separate elements when creating the rule the set is used in. Once that rule is removed, the set is removed as well. They cannot be updated, i.e. once an anonymous set is declared it cannot be changed anymore except by removing/altering the rule that uses the anonymous set. .*Using anonymous sets to accept particular subnets and ports* ---------- nft add rule filter input ip saddr { 10.0.0.0/8, 192.168.0.0/16 } tcp dport { 22, 443 } accept ---------- Named sets are sets that need to be defined first before they can be referenced in rules. Unlike anonymous sets, elements can be added to or removed from a named set at any time. Sets are referenced from rules using an @ prefixed to the sets name. .*Using named sets to accept addresses and ports* ------------------ nft add rule filter input ip saddr @allowed_hosts tcp dport @allowed_ports accept ------------------ The sets allowed_hosts and allowed_ports need to be created first. The next section describes nft set syntax in more detail. [verse] *add set* ['family'] 'table' 'set' *{ type* 'type' | *typeof* 'expression' *;* [*flags* 'flags' *;*] [*timeout* 'timeout' *;*] [*gc-interval* 'gc-interval' *;*] [*elements = {* 'element'[*,* ...] *} ;*] [*size* 'size' *;*] [*policy* 'policy' *;*] [*auto-merge ;*] *}* {*delete* | *list* | *flush*} *set* ['family'] 'table' 'set' *list sets* ['family'] *delete set* ['family'] 'table' *handle* 'handle' {*add* | *delete*} *element* ['family'] 'table' 'set' *{* 'element'[*,* ...] *}* Sets are element containers of a user-defined data type, they are uniquely identified by a user-defined name and attached to tables. Their behaviour can be tuned with the flags that can be specified at set creation time. [horizontal] *add*:: Add a new set in the specified table. See the Set specification table below for more information about how to specify a sets properties. *delete*:: Delete the specified set. *list*:: Display the elements in the specified set. *flush*:: Remove all elements from the specified set. .Set specifications [options="header"] |================= |Keyword | Description | Type |type | data type of set elements | string: ipv4_addr, ipv6_addr, ether_addr, inet_proto, inet_service, mark |typeof | data type of set element | expression to derive the data type from |flags | set flags | string: constant, dynamic, interval, timeout |timeout | time an element stays in the set, mandatory if set is added to from the packet path (ruleset).| string, decimal followed by unit. Units are: d, h, m, s |gc-interval | garbage collection interval, only available when timeout or flag timeout are active | string, decimal followed by unit. Units are: d, h, m, s |elements | elements contained by the set | set data type |size | maximum number of elements in the set, mandatory if set is added to from the packet path (ruleset).| unsigned integer (64 bit) |policy | set policy | string: performance [default], memory |auto-merge | automatic merge of adjacent/overlapping set elements (only for interval sets) | |================= MAPS ----- [verse] *add map* ['family'] 'table' 'map' *{ type* 'type' | *typeof* 'expression' [*flags* 'flags' *;*] [*elements = {* 'element'[*,* ...] *} ;*] [*size* 'size' *;*] [*policy* 'policy' *;*] *}* {*delete* | *list* | *flush*} *map* ['family'] 'table' 'map' *list maps* ['family'] Maps store data based on some specific key used as input. They are uniquely identified by a user-defined name and attached to tables. [horizontal] *add*:: Add a new map in the specified table. *delete*:: Delete the specified map. *list*:: Display the elements in the specified map. *flush*:: Remove all elements from the specified map. *add element*:: Comma-separated list of elements to add into the specified map. *delete element*:: Comma-separated list of element keys to delete from the specified map. .Map specifications [options="header"] |================= |Keyword | Description | Type |type | data type of map elements | string: ipv4_addr, ipv6_addr, ether_addr, inet_proto, inet_service, mark, counter, quota. Counter and quota can't be used as keys |typeof | data type of set element | expression to derive the data type from |flags | map flags | string: constant, interval |elements | elements contained by the map | map data type |size | maximum number of elements in the map | unsigned integer (64 bit) | policy | map policy | string: performance [default], memory |================= ELEMENTS -------- [verse] ____ {*add* | *create* | *delete* | *get* } *element* ['family'] 'table' 'set' *{* 'ELEMENT'[*,* ...] *}* 'ELEMENT' := 'key_expression' 'OPTIONS' [*:* 'value_expression'] 'OPTIONS' := [*timeout* 'TIMESPEC'] [*expires* 'TIMESPEC'] [*comment* 'string'] 'TIMESPEC' := ['num'*d*]['num'*h*]['num'*m*]['num'[*s*]] ____ Element-related commands allow to change contents of named sets and maps. 'key_expression' is typically a value matching the set type. 'value_expression' is not allowed in sets but mandatory when adding to maps, where it matches the data part in it's type definition. When deleting from maps, it may be specified but is optional as 'key_expression' uniquely identifies the element. *create* command is similar to *add* with the exception that none of the listed elements may already exist. *get* command is useful to check if an element is contained in a set which may be non-trivial in very large and/or interval sets. In the latter case, the containing interval is returned instead of just the element itself. .Element options [options="header"] |================= |Option | Description |timeout | timeout value for sets/maps with flag *timeout* |expires | the time until given element expires, useful for ruleset replication only |comment | per element comment field |================= FLOWTABLES ----------- [verse] {*add* | *create*} *flowtable* ['family'] 'table' 'flowtable' *{ hook* 'hook' *priority* 'priority' *; devices = {* 'device'[*,* ...] *} ; }* *list flowtables* ['family'] {*delete* | *list*} *flowtable* ['family'] 'table' 'flowtable' *delete* *flowtable* ['family'] 'table' *handle* 'handle' Flowtables allow you to accelerate packet forwarding in software. Flowtables entries are represented through a tuple that is composed of the input interface, source and destination address, source and destination port; and layer 3/4 protocols. Each entry also caches the destination interface and the gateway address - to update the destination link-layer address - to forward packets. The ttl and hoplimit fields are also decremented. Hence, flowtables provides an alternative path that allow packets to bypass the classic forwarding path. Flowtables reside in the ingress hook that is located before the prerouting hook. You can select which flows you want to offload through the flow expression from the forward chain. Flowtables are identified by their address family and their name. The address family must be one of ip, ip6, or inet. The inet address family is a dummy family which is used to create hybrid IPv4/IPv6 tables. When no address family is specified, ip is used by default. The *priority* can be a signed integer or *filter* which stands for 0. Addition and subtraction can be used to set relative priority, e.g. filter + 5 equals to 5. [horizontal] *add*:: Add a new flowtable for the given family with the given name. *delete*:: Delete the specified flowtable. *list*:: List all flowtables. STATEFUL OBJECTS ---------------- [verse] {*add* | *delete* | *list* | *reset*} 'type' ['family'] 'table' 'object' *delete* 'type' ['family'] 'table' *handle* 'handle' *list counters* ['family'] *list quotas* ['family'] Stateful objects are attached to tables and are identified by an unique name. They group stateful information from rules, to reference them in rules the keywords "type name" are used e.g. "counter name". [horizontal] *add*:: Add a new stateful object in the specified table. *delete*:: Delete the specified object. *list*:: Display stateful information the object holds. *reset*:: List-and-reset stateful object. include::stateful-objects.txt[] EXPRESSIONS ------------ Expressions represent values, either constants like network addresses, port numbers, etc., or data gathered from the packet during ruleset evaluation. Expressions can be combined using binary, logical, relational and other types of expressions to form complex or relational (match) expressions. They are also used as arguments to certain types of operations, like NAT, packet marking etc. Each expression has a data type, which determines the size, parsing and representation of symbolic values and type compatibility with other expressions. DESCRIBE COMMAND ~~~~~~~~~~~~~~~~ [verse] *describe* 'expression' | 'data type' The *describe* command shows information about the type of an expression and its data type. A data type may also be given, in which nft will display more information about the type. .The describe command --------------------- $ nft describe tcp flags payload expression, datatype tcp_flag (TCP flag) (basetype bitmask, integer), 8 bits predefined symbolic constants: fin 0x01 syn 0x02 rst 0x04 psh 0x08 ack 0x10 urg 0x20 ecn 0x40 cwr 0x80 --------------------- DATA TYPES ---------- Data types determine the size, parsing and representation of symbolic values and type compatibility of expressions. A number of global data types exist, in addition some expression types define further data types specific to the expression type. Most data types have a fixed size, some however may have a dynamic size, f.i. the string type. + Some types also have predefined symbolic constants. Those can be listed using the nft *describe* command: --------------------- $ nft describe ct_state datatype ct_state (conntrack state) (basetype bitmask, integer), 32 bits pre-defined symbolic constants (in hexadecimal): invalid 0x00000001 new ... --------------------- Types may be derived from lower order types, f.i. the IPv4 address type is derived from the integer type, meaning an IPv4 address can also be specified as an integer value. + In certain contexts (set and map definitions), it is necessary to explicitly specify a data type. Each type has a name which is used for this. include::data-types.txt[] PRIMARY EXPRESSIONS ------------------- The lowest order expression is a primary expression, representing either a constant or a single datum from a packet's payload, meta data or a stateful module. include::primary-expression.txt[] PAYLOAD EXPRESSIONS ------------------- Payload expressions refer to data from the packet's payload. include::payload-expression.txt[] STATEMENTS ---------- Statements represent actions to be performed. They can alter control flow (return, jump to a different chain, accept or drop the packet) or can perform actions, such as logging, rejecting a packet, etc. + Statements exist in two kinds. Terminal statements unconditionally terminate evaluation of the current rule, non-terminal statements either only conditionally or never terminate evaluation of the current rule, in other words, they are passive from the ruleset evaluation perspective. There can be an arbitrary amount of non-terminal statements in a rule, but only a single terminal statement as the final statement. include::statements.txt[] ADDITIONAL COMMANDS ------------------- These are some additional commands included in nft. MONITOR ~~~~~~~~ The monitor command allows you to listen to Netlink events produced by the nf_tables subsystem, related to creation and deletion of objects. When they occur, nft will print to stdout the monitored events in either JSON or native nft format. + To filter events related to a concrete object, use one of the keywords 'tables', 'chains', 'sets', 'rules', 'elements', 'ruleset'. + To filter events related to a concrete action, use keyword 'new' or 'destroy'. Hit ^C to finish the monitor operation. .Listen to all events, report in native nft format -------------------------------------------------- % nft monitor -------------------------------------------------- .Listen to deleted rules, report in JSON format ----------------------------------------------- % nft -j monitor destroy rules ----------------------------------------------- .Listen to both new and destroyed chains, in native nft format ----------------------------------------------------------------- % nft monitor chains ------------------------------- .Listen to ruleset events such as table, chain, rule, set, counters and quotas, in native nft format ---------------------------------------------------------------------------------------------------- % nft monitor ruleset --------------------- ERROR REPORTING --------------- When an error is detected, nft shows the line(s) containing the error, the position of the erroneous parts in the input stream and marks up the erroneous parts using carets (^). If the error results from the combination of two expressions or statements, the part imposing the constraints which are violated is marked using tildes (~). + For errors returned by the kernel, nft cannot detect which parts of the input caused the error and the entire command is marked. .Error caused by single incorrect expression -------------------------------------------- :1:19-22: Error: Interface does not exist filter output oif eth0 ^^^^ -------------------------------------------- .Error caused by invalid combination of two expressions ------------------------------------------------------- :1:28-36: Error: Right hand side of relational expression (==) must be constant filter output tcp dport == tcp dport ~~ ^^^^^^^^^ ------------------------------------------------------- .Error returned by the kernel ----------------------------- :0:0-23: Error: Could not process rule: Operation not permitted filter output oif wlan0 ^^^^^^^^^^^^^^^^^^^^^^^ --------------------------------- EXIT STATUS ----------- On success, nft exits with a status of 0. Unspecified errors cause it to exit with a status of 1, memory allocation errors with a status of 2, unable to open Netlink socket with 3. SEE ALSO -------- [verse] libnftables(3), libnftables-json(5), iptables(8), ip6tables(8), arptables(8), ebtables(8), ip(8), tc(8) There is an official wiki at: https://wiki.nftables.org AUTHORS ------- nftables was written by Patrick McHardy and Pablo Neira Ayuso, among many other contributors from the Netfilter community. COPYRIGHT --------- Copyright © 2008-2014 Patrick McHardy Copyright © 2013-2018 Pablo Neira Ayuso + nftables is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2 as published by the Free Software Foundation. + This documentation is licensed under the terms of the Creative Commons Attribution-ShareAlike 4.0 license, CC BY-SA 4.0 http://creativecommons.org/licenses/by-sa/4.0/.