META EXPRESSIONS
~~~~~~~~~~~~~~~~
[verse]
*meta* {*length* | *nfproto* | *l4proto* | *protocol* | *priority*}
[*meta*] {*mark* | *iif* | *iifname* | *iiftype* | *oif* | *oifname* | *oiftype* | *skuid* | *skgid* | *nftrace* | *rtclassid* | *ibrname* | *obrname* | *pkttype* | *cpu* | *iifgroup* | *oifgroup* | *cgroup* | *random* | *ipsec* | *iifkind* | *oifkind* | *time* | *hour* | *day* }

A meta expression refers to meta data associated with a packet.

There are two types of meta expressions: unqualified and qualified meta
expressions. Qualified meta expressions require the meta keyword before the meta
key, unqualified meta expressions can be specified by using the meta key
directly or as qualified meta expressions. Meta l4proto is useful to match a
particular transport protocol that is part of either an IPv4 or IPv6 packet. It
will also skip any IPv6 extension headers present in an IPv6 packet.

meta iif, oif, iifname and oifname are used to match the interface a packet
arrived on or is about to be sent out on.

iif and oif are used to match on the interface index, whereas iifname and
oifname are used to match on the interface name.
This is not the same -- assuming the rule

  filter input meta iif "foo"

Then this rule can only be added if the interface "foo" exists.
Also, the rule will continue to match even if the
interface "foo" is renamed to "bar".

This is because internally the interface index is used.
In case of dynamically created interfaces, such as tun/tap or dialup
interfaces (ppp for example), it might be better to use iifname or oifname
instead.

In these cases, the name is used so the interface doesn't have to exist to
add such a rule, it will stop matching if the interface gets renamed and it
will match again in case interface gets deleted and later a new interface
with the same name is created.

.Meta expression types
[options="header"]
|==================
|Keyword | Description | Type
|length|
Length of the packet in bytes|
integer (32-bit)
|nfproto|
real hook protocol family, useful only in inet table|
integer (32 bit)
|l4proto|
layer 4 protocol, skips ipv6 extension headers|
integer (8 bit)
|protocol|
EtherType protocol value|
ether_type
|priority|
TC packet priority|
tc_handle
|mark|
Packet mark |
mark
|iif|
Input interface index |
iface_index
|iifname|
Input interface name |
ifname
|iiftype|
Input interface type|
iface_type
|oif|
Output interface index|
iface_index
|oifname|
Output interface name|
ifname
|oiftype|
Output interface hardware type|
iface_type
|skuid|
UID associated with originating socket|
uid
|skgid|
GID associated with originating socket|
gid
|rtclassid|
Routing realm|
realm
|ibrname|
Input bridge interface name|
ifname
|obrname|
Output bridge interface name|
ifname
|pkttype|
packet type|
pkt_type
|cpu|
cpu number processing the packet|
integer (32 bit)
|iifgroup|
incoming device group|
devgroup
|oifgroup|
outgoing device group|
devgroup
|cgroup|
control group id |
integer (32 bit)
|random|
pseudo-random number|
integer (32 bit)
|ipsec|
boolean|
boolean (1 bit)
|iifkind|
Input interface kind |
|oifkind|
Output interface kind|
|time|
Absolute time of packet reception|
Integer (32 bit) or string
|day|
Day of week|
Integer (8 bit) or string
|hour|
Hour of day|
String
|====================

.Meta expression specific types
[options="header"]
|==================
|Type | Description
|iface_index |
Interface index (32 bit number). Can be specified numerically or as name of an existing interface.
|ifname|
Interface name (16 byte string). Does not have to exist.
|iface_type|
Interface type (16 bit number).
|uid|
User ID (32 bit number). Can be specified numerically or as user name.
|gid|
Group ID (32 bit number). Can be specified numerically or as group name.
|realm|
Routing Realm (32 bit number). Can be specified numerically or as symbolic name defined in /etc/iproute2/rt_realms.
|devgroup_type|
Device group (32 bit number). Can be specified numerically or as symbolic name defined in /etc/iproute2/group.
|pkt_type|
Packet type: *host* (addressed to local host), *broadcast* (to all),
*multicast* (to group), *other* (addressed to another host).
|ifkind|
Interface kind (16 byte string). Does not have to exist.
|time|
Either an integer or a date in ISO format. For example: "2019-06-06 17:00".
Hour and seconds are optional and can be omitted if desired. If omitted,
midnight will be assumed.
The following three would be equivalent: "2019-06-06", "2019-06-06 00:00"
and "2019-06-06 00:00:00".
When an integer is given, it is assumed to be a UNIX timestamp.
|day|
Either a day of week ("Monday", "Tuesday", etc.), or an integer between 0 and 6.
Strings are matched case-insensitively, and a full match is not expected (e.g. "Mon" would match "Monday").
When an integer is given, 0 is Sunday and 6 is Saturday.
|hour|
A string representing an hour in 24-hour format. Seconds can optionally be specified.
For example, 17:00 and 17:00:00 would be equivalent.
|=============================

.Using meta expressions
-----------------------
# qualified meta expression
filter output meta oif eth0

# unqualified meta expression
filter output oif eth0

# packet was subject to ipsec processing
raw prerouting meta ipsec exists accept
-----------------------

SOCKET EXPRESSION
~~~~~~~~~~~~~~~~~
[verse]
*socket* {*transparent* | *mark*}

Socket expression can be used to search for an existing open TCP/UDP socket and
its attributes that can be associated with a packet. It looks for an established
or non-zero bound listening socket (possibly with a non-local address).

.Available socket attributes
[options="header"]
|==================
|Name |Description| Type
|transparent|
Value of the IP_TRANSPARENT socket option in the found socket. It can be 0 or 1.|
boolean (1 bit)
|mark| Value of the socket mark (SOL_SOCKET, SO_MARK). | mark
|==================

.Using socket expression
------------------------
# Mark packets that correspond to a transparent socket
table inet x {
    chain y {
	type filter hook prerouting priority -150; policy accept;
        socket transparent 1 mark set 0x00000001 accept
    }
}

# Trace packets that corresponds to a socket with a mark value of 15
table inet x {
    chain y {
        type filter hook prerouting priority -150; policy accept;
        socket mark 0x0000000f nftrace set 1
    }
}

# Set packet mark to socket mark
table inet x {
    chain y {
        type filter hook prerouting priority -150; policy accept;
        tcp dport 8080 mark set socket mark
    }
}
----------------------

OSF EXPRESSION
~~~~~~~~~~~~~~
[verse]
*osf* [*ttl* {*loose* | *skip*}] {*name* | *version*}

The osf expression does passive operating system fingerprinting. This
expression compares some data (Window Size, MSS, options and their order, DF,
and others) from packets with the SYN bit set.

.Available osf attributes
[options="header"]
|==================
|Name |Description| Type
|ttl|
Do TTL checks on the packet to determine the operating system.|
string
|version|
Do OS version checks on the packet.|
|name|
Name of the OS signature to match. All signatures can be found at pf.os file.
Use "unknown" for OS signatures that the expression could not detect.|
string
|==================

.Available ttl values
---------------------
If no TTL attribute is passed, make a true IP header and fingerprint TTL true comparison. This generally works for LANs.

* loose: Check if the IP header's TTL is less than the fingerprint one. Works for globally-routable addresses.
* skip: Do not compare the TTL at all.
---------------------

.Using osf expression
---------------------
# Accept packets that match the "Linux" OS genre signature without comparing TTL.
table inet x {
    chain y {
	type filter hook input priority 0; policy accept;
        osf ttl skip name "Linux"
    }
}
-----------------------

FIB EXPRESSIONS
~~~~~~~~~~~~~~~
[verse]
*fib* {*saddr* | *daddr* | *mark* | *iif* | *oif*} [*.* ...] {*oif* | *oifname* | *type*}

A fib expression queries the fib (forwarding information base) to obtain
information such as the output interface index a particular address would use.
The input is a tuple of elements that is used as input to the fib lookup
functions.

.fib expression specific types
[options="header"]
|==================
|Keyword| Description| Type
|oif|
Output interface index|
integer (32 bit)
|oifname|
Output interface name|
string
|type|
Address type |
fib_addrtype
|=======================

Use *nft* *describe* *fib_addrtype* to get a list of all address types.

.Using fib expressions
----------------------
# drop packets without a reverse path
filter prerouting fib saddr . iif oif missing drop

In this example, 'saddr . iif' looks up routing information based on the source address and the input interface.
oif picks the output interface index from the routing information.
If no route was found for the source address/input interface combination, the output interface index is zero.
In case the input interface is specified as part of the input key, the output interface index is always the same as the input interface index or zero.
If only 'saddr oif' is given, then oif can be any interface index or zero.

In this example, 'saddr . iif' lookups up routing information based on the source address and the input interface.
oif picks the output interface index from the routing information.
If no route was found for the source address/input interface combination, the output interface index is zero.
In case the input interface is specified as part of the input key, the output interface index is always the same as the input interface index or zero.
If only 'saddr oif' is given, then oif can be any interface index or zero.

# drop packets to address not configured on ininterface
filter prerouting fib daddr . iif type != { local, broadcast, multicast } drop

# perform lookup in a specific 'blackhole' table (0xdead, needs ip appropriate ip rule)
filter prerouting meta mark set 0xdead fib daddr . mark type vmap { blackhole : drop, prohibit : jump prohibited, unreachable : drop }
----------------------

ROUTING EXPRESSIONS
~~~~~~~~~~~~~~~~~~~
[verse]
*rt* [*ip* | *ip6*] {*classid* | *nexthop* | *mtu* | *ipsec*}

A routing expression refers to routing data associated with a packet.

.Routing expression types
[options="header"]
|=======================
|Keyword| Description| Type
|classid|
Routing realm|
realm
|nexthop|
Routing nexthop|
ipv4_addr/ipv6_addr
|mtu|
TCP maximum segment size of route |
integer (16 bit)
|ipsec|
route via ipsec tunnel or transport |
boolean
|=================================

.Routing expression specific types
[options="header"]
|=======================
|Type| Description
|realm|
Routing Realm (32 bit number). Can be specified numerically or as symbolic name defined in /etc/iproute2/rt_realms.
|========================

.Using routing expressions
--------------------------
# IP family independent rt expression
filter output rt classid 10
filter output rt ipsec missing

# IP family dependent rt expressions
ip filter output rt nexthop 192.168.0.1
ip6 filter output rt nexthop fd00::1
inet filter output rt ip nexthop 192.168.0.1
inet filter output rt ip6 nexthop fd00::1
-------------------------- 

IPSEC EXPRESSIONS
~~~~~~~~~~~~~~~~~

[verse]
*ipsec* {*in* | *out*} [ *spnum* 'NUM' ]  {*reqid* | *spi*}
*ipsec* {*in* | *out*} [ *spnum* 'NUM' ]  {*ip* | *ip6*} {*saddr* | *daddr*}

An ipsec expression refers to ipsec data associated with a packet.

The 'in' or 'out' keyword needs to be used to specify if the expression should
examine inbound or outbound policies. The 'in' keyword can be used in the
prerouting, input and forward hooks.  The 'out' keyword applies to forward,
output and postrouting hooks.
The optional keyword spnum can be used to match a specific state in a chain,
it defaults to 0.

.Ipsec expression types
[options="header"]
|=======================
|Keyword| Description| Type
|reqid|
Request ID|
integer (32 bit)
|spi|
Security Parameter Index|
integer (32 bit)
|saddr|
Source address of the tunnel|
ipv4_addr/ipv6_addr
|daddr|
Destination address of the tunnel|
ipv4_addr/ipv6_addr
|=================================

NUMGEN EXPRESSION
~~~~~~~~~~~~~~~~~

[verse]
*numgen* {*inc* | *random*} *mod* 'NUM' [ *offset* 'NUM' ]

Create a number generator. The *inc* or *random* keywords control its
operation mode: In *inc* mode, the last returned value is simply incremented.
In *random* mode, a new random number is returned. The value after *mod*
keyword specifies an upper boundary (read: modulus) which is not reached by
returned numbers. The optional *offset* allows to increment the returned value
by a fixed offset.

A typical use-case for *numgen* is load-balancing:

.Using numgen expression
------------------------
# round-robin between 192.168.10.100 and 192.168.20.200:
add rule nat prerouting dnat to numgen inc mod 2 map \
	{ 0 : 192.168.10.100, 1 : 192.168.20.200 }

# probability-based with odd bias using intervals:
add rule nat prerouting dnat to numgen random mod 10 map \
        { 0-2 : 192.168.10.100, 3-9 : 192.168.20.200 }
------------------------