o Use more appropriate names for the existing synchronization modes:

        o rename `persistent' mode to `alarm'
        o rename `nack' mode to `ftfw'
o Now default synchronization mode is ftfw instead of alarm

1 files changed, 0 insertions, 135 deletions

diff --git a/examples/sync/nack/node1/conntrackd.conf b/examples/sync/nack/node1/conntrackd.conf
deleted file mode 100644
index 4fc8f22..0000000
--- a/examples/sync/nack/node1/conntrackd.conf
+++ /dev/null
@@ -1,135 +0,0 @@
-#
-# Synchronizer settings
-#
-Sync {
-	Mode NACK {
-		#
-		# Size of the buffer that hold destroy messages for 
-		# possible resends (in bytes)
-		#
-		ResendBufferSize 262144
-
-		#
-		# Entries committed to the connection tracking table 
-		# starts with a limited timeout of N seconds until the
-		# takeover process is completed.
-		#
-		CommitTimeout 180
-
-		# Set Acknowledgement window size
-		ACKWindowSize 20
-	}
-
-	#
-	# Multicast IP and interface where messages are
-	# broadcasted (dedicated link). IMPORTANT: Make sure
-	# that iptables accepts traffic for destination
-	# 225.0.0.50, eg:
-	#
-	#	iptables -I INPUT -d 225.0.0.50 -j ACCEPT
-	#	iptables -I OUTPUT -d 225.0.0.50 -j ACCEPT
-	#
-	Multicast {
-		IPv4_address 225.0.0.50
-		IPv4_interface 192.168.100.100 # IP of dedicated link
-		Interface eth2
-		Group 3780
-	}
-
-	# Enable/Disable message checksumming
-	Checksum on
-
-	# Uncomment this if you want to replicate just certain TCP states.
-	# This option introduces a tradeoff in the replication: it reduces
-	# CPU consumption and lost messages rate at the cost of having 
-	# backup replicas that don't contain the current state that the active 
-	# replica holds. TCP states are: SYN_SENT, SYN_RECV, ESTABLISHED,
-	# FIN_WAIT, CLOSE_WAIT, LAST_ACK, TIME_WAIT, CLOSE, LISTEN.
-	# 
-	# Replicate ESTABLISHED TIME_WAIT for TCP
-
-	# If you have a multiprimary setup (active-active) without connection
-	# persistency, ie. you can't know which firewall handles a packet
-	# that is part of a connection, then you need direct commit of
-	# conntrack entries to the kernel conntrack table. OSPF setups must
-	# set on this option. Default is Off.
-	#
-	# CacheWriteThrough On
-}
-
-#
-# General settings
-#
-General {
-	#
-	# Number of buckets in the caches: hash table
-	#
-	HashSize 8192
-
-	#
-	# Maximum number of conntracks: 
-	# it must be >= $ cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max
-	#
-	HashLimit 65535
-
-	#
-	# Logfile: on, off, or a filename
-	# Default: on (/var/log/conntrackd.log)
-	#
-	#LogFile off
-
-	#
-	# Syslog: on, off or a facility name (daemon (default) or local0..7)
-	# Default: off
-	#
-	#Syslog on
-
-	#
-	# Lockfile
-	# 
-	LockFile /var/lock/conntrack.lock
-
-	#
-	# Unix socket configuration
-	#
-	UNIX {
-		Path /tmp/sync.sock
-		Backlog 20
-	}
-
-	#
-	# Netlink socket buffer size
-	#
-	SocketBufferSize 262142
-
-	#
-	# Increase the socket buffer up to maximum if required
-	#
-	SocketBufferSizeMaxGrown 655355
-}
-
-#
-# Ignore traffic for a certain set of IP's: Usually
-# all the IP assigned to the firewall since local
-# traffic must be ignored, just forwarded connections
-# are worth to replicate
-#
-IgnoreTrafficFor {
-	IPv4_address 127.0.0.1 # loopback
-	IPv4_address 192.168.0.1
-	IPv4_address 192.168.1.1
-	IPv4_address 192.168.100.100 # dedicated link ip
-	IPv4_address 192.168.0.100 # virtual IP 1
-	IPv4_address 192.168.1.100 # virtual IP 2
-}
-
-#
-# Do not replicate certain protocol traffic 
-#
-IgnoreProtocol {
-	UDP
-	ICMP
-	IGMP
-	VRRP
-	# numeric numbers also valid
-}