summaryrefslogtreecommitdiffstats
path: root/doc/sync/alarm/conntrackd.conf
diff options
context:
space:
mode:
Diffstat (limited to 'doc/sync/alarm/conntrackd.conf')
-rw-r--r--doc/sync/alarm/conntrackd.conf52
1 files changed, 48 insertions, 4 deletions
diff --git a/doc/sync/alarm/conntrackd.conf b/doc/sync/alarm/conntrackd.conf
index cefda00..9197db3 100644
--- a/doc/sync/alarm/conntrackd.conf
+++ b/doc/sync/alarm/conntrackd.conf
@@ -88,7 +88,7 @@ Sync {
# of the sender buffer. The default size is usually around
# ~100 KBytes which is fairly small for busy firewalls.
#
- McastSndSocketBuffer 1249280
+ SndSocketBuffer 1249280
# The multicast receiver uses a buffer to enqueue the packets
# that the socket is pending to handle. The default size of this
@@ -100,7 +100,7 @@ Sync {
# the receiver buffer. The default size is usually around
# ~100 KBytes which is fairly small for busy firewalls.
#
- McastRcvSocketBuffer 1249280
+ RcvSocketBuffer 1249280
#
# Enable/Disable message checksumming. This is a good
@@ -124,10 +124,54 @@ Sync {
# Group 3781
# IPv4_interface 192.168.100.101
# Interface eth3
- # # McastSndSocketBuffer 1249280
- # # McastRcvSocketBuffer 1249280
+ # # SndSocketBuffer 1249280
+ # # RcvSocketBuffer 1249280
# Checksum on
# }
+
+ #
+ # You can use Unicast UDP instead of Multicast to propagate events.
+ # Note that you cannot use unicast UDP and Multicast at the same
+ # time, you can only select one.
+ #
+ # UDP {
+ #
+ # UDP address that this firewall uses to listen to events.
+ #
+ # IPv4_address 192.168.2.100
+
+ #
+ # Destination UDP address that receives events, ie. the other
+ # firewall's dedicated link address.
+ #
+ # IPv4_Destination_Address 192.168.2.101
+
+ #
+ # UDP port used
+ #
+ # Port 3780
+
+ #
+ # The name of the interface that you are going to use to
+ # send the synchronization messages.
+ #
+ # Interface eth2
+
+ #
+ # The sender socket buffer size
+ #
+ # SndSocketBuffer 1249280
+
+ #
+ # The receiver socket buffer size
+ #
+ # RcvSocketBuffer 1249280
+
+ #
+ # Enable/Disable message checksumming.
+ #
+ # Checksum on
+ # }
}
#