From 9e951b04111fec10f07e3e5c9062c2c24537dd1a Mon Sep 17 00:00:00 2001 From: Arturo Borrero Date: Thu, 19 Nov 2015 13:46:45 +0100 Subject: conntrack-tools: add conntrackd.conf(5) manpage This new manpage describes all the configuration options of the conntrackd.conf file. While at it, point conntrackd(8) to this new manpage. Signed-off-by: Arturo Borrero Gonzalez Signed-off-by: Pablo Neira Ayuso --- conntrackd.conf.5 | 1075 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1075 insertions(+) create mode 100644 conntrackd.conf.5 (limited to 'conntrackd.conf.5') diff --git a/conntrackd.conf.5 b/conntrackd.conf.5 new file mode 100644 index 0000000..4781825 --- /dev/null +++ b/conntrackd.conf.5 @@ -0,0 +1,1075 @@ +.\" +.\" (C) Copyright 2015, Arturo Borrero Gonzalez +.\" +.\" %%%LICENSE_START(GPLv2+_DOC_FULL) +.\" This is free documentation; you can redistribute it and/or +.\" modify it under the terms of the GNU General Public License as +.\" published by the Free Software Foundation; either version 2 of +.\" the License, or (at your option) any later version. +.\" +.\" The GNU General Public License's references to "object code" +.\" and "executables" are to be interpreted as the output of any +.\" document formatting or typesetting system, including +.\" intermediate and printed output. +.\" +.\" This manual is distributed in the hope that it will be useful, +.\" but WITHOUT ANY WARRANTY; without even the implied warranty of +.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.\" GNU General Public License for more details. +.\" +.\" You should have received a copy of the GNU General Public +.\" License along with this manual; if not, see +.\" . +.\" %%%LICENSE_END +.\" +.TH CONNTRACKD.CONF 5 "Nov 19, 2015" + +.SH NAME +conntrackd.conf \- configuration file for conntrackd daemon + +.SH DESCRIPTION +\fBconntrackd.conf\fP is the main configuration file for the +\fBconntrackd(8)\fP daemon. It is loaded by calling `\fIconntrackd -C +conntrackd.conf\fP'. + +The format of this file is simple, using brackets for sections and +key-value pairs for concrete configuration directives: + +.nf + section1 { + option1 value1 + option2 value2 + } + section2 { + option3 value3 + subsection1 { + option4 value4 + } + } +.fi + +You should consider this file as case-sensitive. +Empty lines and lines starting with the '#' character are ignored. + +Before starting to develop a new configuration, you may want to learn the +concepts behind this technlogy at +\fIhttp://conntrack-tools.netfilter.org/manual.html\fP. + +There are complete configuration examples at the end of this man page. + +.SH SYNC + +This top-level section defines how \fBconntrackd(8)\fP should handle +synchronization with other cluster nodes. + +There are 3 main synchronization modes or protocols: \fBNOTRACK\fP, \fBALARM\fP +and \fBFTFW\fP. + +There are 3 transport protocols as well: \fBTCP\fP, \fBMulticast\fP +and \fBUDP\fP. + +You have to choose one synchronization mode and one transport protocol. + +Also, there are some general options in this section. + +.SS Mode FTFW + +This mode is based on a reliable protocol that performs message tracking. +Thus, the protocol can recover from message loss, re-ordering and corruption. + +In this synchronization mode you may configure \fBResendQueueSize\fP, +\fBCommitTimeout\fP, \fBPurgeTimeout\fP, \fBACKWindowSize\fP and +\fBDisableExternalCache\fP. + +.TP +.BI "ResendQueueSize " +Size of the resend queue (in objects). This is the maximum number of objects +that can be stored waiting to be confirmed via acknoledgment. +If you keep this value low, the daemon will have less chances to recover +state-changes under message omission. On the other hand, if you keep this value +high, the daemon will consume more memory to store dead objects. + +Example: ResendQueueSize 131072 + +Default is 131072 objects. + +.TP +.BI "CommitTimeout " +This parameter allows you to set an initial fixed timeout for the committed +entries when this node goes from backup to primary. This mechanism provides +a way to purge entries that were not recovered appropriately after the +specified fixed timeout. If you set a low value, TCP entries in Established +states with no traffic may hang. For example, an SSH connection without +KeepAlive enabled. + +Example: CommitTimeout 180 + +By default, this option is not set (the daemon uses an approximate timeout +value calculation mechanism). + +.TP +.BI "PurgeTimeout " +If the firewall replica goes from primary to backup, the +`\fIconntrackd -t command\fP' is invoked in the script. This command schedules +a flush of the table in N seconds. + +This is useful to purge the connection tracking table of zombie entries and +avoid clashes with old entries if you trigger several consecutive hand-overs. + +Default is 60 seconds. + +.TP +.BI "ACKWindowSize " +Set the acknowledgement window size. If you decrease this value, the number of +acknowlegdments increases. More acknowledgments means more overhead as +\fBconntrackd(8)\fP has to handle more control messages. On the other hand, if +you increase this value, the resend queue gets more populated. This results in +more overhead in the queue releasing. + +Example: ACKWindowSize 300 + +If not set, default window size is 300 (value is based on some practical +experiments measuring the cycles spent by the acknowledgment handling +with oprofile). + +.TP +.BI "DisableExternalCache " +This clause allows you to disable the external cache. Thus, the state entries +are directly injected into the kernel conntrack table. As a result, you save +memory in user-space but you consume slots in the kernel conntrack table for +backup state entries. Moreover, disabling the external cache means more CPU +consumption. You need a \fBLinux kernel >= 2.6.29\fP to use this feature. + +If you are installing \fBconntrackd(8)\fP for first time, please read the user +manual and I encourage you to consider using the fail-over scripts instead of +enabling this option! + +By default, this clause is set off. + +.SS Mode ALARM + +This mode is spamming. It is based on a alarm-based protocol that periodically +re-sends the flow state to the backup firewall replicas. This protocol consumes +a lot of bandwidth but it resolves synchronization problems fast. + +In this synchronization mode you may configure \fBRefreshTime\fP, +\fBCacheTimeout\fP, \fBCommitTimeout\fP and \fBPurgeTimeout\fP. + +.TP +.BI "RefreshTime " +If a conntrack entry is not modified in <= N seconds, then a message is +broadcasted. For example, this mechanism may be used to resynchronize nodes +that just joined the multicast group. + +Example: RefreshTime 15 + +.TP +.BI "CacheTimeout " +If we don't receive a notification about the state of an entry in the +external cache after N seconds, then remove it. + +Example: CacheTimeout 180 + +.TP +.BI "CommitTimeout " +Same as in \fBFTFW\fP mode. + +.TP +.BI "PurgeTimeout " +Same as in \fBFTFW\fP mode. + +.SS Mode NOTRACK + +Is the most simple mode as it is based on a best effort replication protocol, +ie. unreliable protocol. This protocol sends and receives the state information +without performing any specific checking. + +In this synchronization mode you may configure \fBDisableInternalCache\fP, +\fBDisableExternalCache\fP, \fBCommitTimeout\fP and \fBPurgeTimeout\fP. + +.TP +.BI "DisableInternalCache " +This clause allows you to disable the internal cache. Thus, the synchronization +messages are directly sent through the dedicated link. + +This option is set off by default. + +.TP +.BI "DisableExternalCache " +Same as in \fBFTFW\fP mode. + +.TP +.BI "CommitTimeout " +Same as in \fBFTFW\fP mode. + +.TP +.BI "PurgeTimeout " +Same as in \fBFTFW\fP mode. + +.SS MULTICAST + +This section indicates to \fBconntrackd(8)\fP to use multicast as transport +mechanism between nodes of the firewall cluster. + +Please note you can specify more than one dedicated link. Thus, if one +dedicated link fails, the daemon can fail-over to another. Note that adding +more than one dedicated link does not mean that state-updates will be sent to +all of them. There is only one active dedicated link at a given moment. + +The \fIDefault\fP keyword indicates that this interface will be selected as the +initial dedicated link. You can have up to 4 redundant dedicated links. + +Note: use different multicast groups for every redundant link. + +Example: +.nf + Multicast Default { + IPv4_address 225.0.0.51 + Group 3781 + IPv4_interface 192.168.100.101 + Interface eth3 + SndSocketBuffer 1249280 + RcvSocketBuffer 1249280 + Checksum on + } + Multicast { + IPv4_address 225.0.0.51 + Group 3782 + IPv4_interface 192.168.100.102 + Interface eth4 + SndSocketBuffer 1249280 + RcvSocketBuffer 1249280 + Checksum on + } +.fi + +.TP +.BI "IPv4_address
" +Multicast address: The address that you use as destination in the +synchronization messages. You do not have to add this IP to any of your +existing interfaces. + +Example: IPv4_address 255.0.0.50 + +.TP +.BI "Group " +The multicast group that identifies the cluster. + +Example: Group 3780 + +If any doubt, do not modify this value. + +.TP +.BI "IPv4_interface
" +IP address of the interface that you are going to use to +send the synchronization messages. Remember that you must +use a dedicated link for the synchronization messages. + +Example: IPv4_interface 192.168.100.100 + +.TP +.BI "Interface " +The name of the interface that you are going to use to send the synchronization +messages. + +Example: Interface eth2 + +.TP +.BI "SndSocketBuffer " +This transport protocol sender uses a buffer to enqueue the packets +that are going to be transmitted. The default size of this socket buffer is +available at \fB/proc/sys/net/core/wmem_default\fP. + +This value determines the chances to have an overrun in the sender queue. The +overrun results in packet loss, thus, losing state information that would have +to be retransmitted. If you notice some packet loss, you may want to increase +the size of the buffer. The system default size is usually around +~100 KBytes which is fairly small for busy firewalls. + +Note: The \fBNOTRACK\fP protocol is best effort, it is really recommended +to increase the buffer size. + +Example: SndSocketBuffer 1249280 + +.TP +.BI "RcvSocketBuffer " +This transport protocol receiver uses a buffer to enqueue the +packets that the socket is pending to handle. The default size of this socket +buffer is available at \fB/proc/sys/net/core/rmem_default\fP. + +This value determines the chances to have an overrun in the receiver queue. +The overrun results in packet loss, thus, losing state information that would +have to be retransmitted. If you notice some packet loss, you may want to +increase the size of the buffer. The system default size is usually +around ~100 KBytes which is fairly small for busy firewalls. + +Note: The \fBNOTRACK\fP protocol is best effort, it is really recommended +to increase the buffer size. + +Example: RcvSocketBuffer 1249280 + +.TP +.BI "Checksum " +Enable/Disable message checksumming. This is a good property to achieve +fault-tolerance. In case of doubt, use it. + +.SS UDP +This section indicates to \fBconntrackd(8)\fP to use UDP as transport +mechanism between nodes of the firewall cluster. + +As in the \fBMulticast\fP configuration, you may especify several fail-over +dedicated links using the \fIDefault\fP keyword. + +Example: +.nf + UDP { + IPv4_address 172.16.0.1 + IPv4_Destination_Address 172.16.0.2 + Port 3781 + Interface eth3 + SndSocketBuffer 1249280 + RcvSocketBuffer 1249280 + Checksum on + } +.fi + +.TP +.BI "IPv4_address
" +UDP IPv4 address that this firewall uses to listen to events. + +Example: IPv4_address 192.168.2.100 + +.TP +.BI "IPv6_address
" +UDP IPv6 address that this firewall uses to listen to events. + +Example: IPv6_address fe80::215:58ff:fe28:5a27 + +.TP +.BI "IPv4_Destination_Address
" +Destination IPv4 UDP address that receives events, ie. the other firewall's +dedicated link address. + +Example: IPv4_Destination_Address 192.168.2.101 + +.TP +.BI "IPv6_Destionation_Address
" +Destination IPv6 UDP address that receives events, ie. the other firewall's +dedicated link address. + +Example: IPv6_Destination_Address fe80::2d0:59ff:fe2a:775c + +.TP +.BI "Port " +UDP port used + +Example: Port 3780 + +.TP +.BI "Interface " +Same as in the \fBMulticast\fP transport protocol configuration. + +.TP +.BI "SndSocketBuffer " +Same as in the \fBMulticast\fP transport protocol configuration. + +.TP +.BI "RcvSocketBuffer " +Same as in the \fBMulticast\fP transport protocol configuration. + +.TP +.BI "Checksum " +Same as in the \fBMulticast\fP transport protocol configuration. + + +.SS TCP +You can also use Unicast TCP to propagate events. + +If you combine this transport with the \fBNOTRACK\fP mode, it becomes reliable. + +The TCP transport protocol can be configured in exactly the same way as +the \fBUDP\fP transport protocol. + +As in the \fBMulticast\fP configuration, you may especify several fail-over +dedicated links using the \fIDefault\fP keyword. + +Example: +.nf + TCP { + IPv6_address fe80::215:58ff:fe28:5a27 + IPv6_Destination_Address fe80::215:58ff:fe28:5a27 + Port 3781 + Interface eth2 + SndSocketBuffer 1249280 + RcvSocketBuffer 1249280 + Checksum on + } +.fi + +.SS OPTIONS + +Other unsorted options that are related to the synchronization protocol +or transport mechanism. + +.TP +.BI "TCPWindowTracking " +TCP state-entries have window tracking disabled by default, you can enable it +with this option. As said, default is off. +This feature requires a \fBLinux kernel >= 2.6.36\fP. + +.TP +.BI "ExpectationSync " +Set this option on if you want to enable the synchronization of expectations. +You have to specify the list of helpers that you want to enable. + +This feature requires a \fBLinux kernel >= 3.5\fP. + +Example, sync all expectations: +.nf + ExpectationSync on +.fi + +Example, sync given expectations: +.nf + ExpectationSync { + ftp + ras + q.931 + h.245 + sip + } +.fi + +By default, this option is disabled. + +.SH GENERAL + +This top-level section contains generic configuration directives for the +\fBconntrackd(8)\fP daemon. + +.TP +.BI "Systemd " +Enable \fBsystemd(1)\fP runtime support if \fBconntrackd(8)\fP is compiled +with the proper configuration. Then you can use a service unit of +\fIType=notify\fP. + +Obviusly, this requires the init systemd of your system to be \fBsystemd(1)\fP. + +Note: \fBsystemd(1)\fP watchdog is supported as well. + +Example: Systemd off + +By default runtime support is activated. + +.TP +.BI "Nice " +Set the \fBnice(1)\fP value of the daemon, this value goes from -20 (most +favorable scheduling) to 19 (least favorable). Using a very low value reduces +the chances to lose state-change events. + +Example: Nice -20 + +Default is 0 but this example sets it to most favourable scheduling as +this is generally a good idea. + +.TP +.BI "HashSize " +Number of buckets in the cache hashtable. The bigger it is, the closer it gets +to \fIO(1)\fP at the cost of consuming more memory. Read some documents about +tuning hashtables for further reference. + +Example: HashSize 32768 + +.TP +.BI "HashLimit " +Maximum number of conntracks, it should be double of +\fB/proc/sys/net/netfilter/nf_conntrack_max\fP since the daemon may keep some +dead entries cached for possible retransmission during state synchronization. + +Example: HashLimit 131072 + +.TP +.BI "LogFile " +Enable \fBconntrackd(8)\fP to log to a file. + +Example: LogFile on + +Default is off. The default logfile is \fB/var/log/conntrackd.log\fP. + +.TP +.BI "Syslog " +Enable connection logging via Syslog. If you set the facility, use the same as +in the \fBStats\fP section, otherwise you'll get a warning message. + +Example: Syslog local0 + +Default is off. + +.TP +.BI "Lockfile " +Lockfile to be used by \fBconntrackd(8)\fP (absolute path). + +Example: LockFile /var/lock/conntrack.lock + +Default is \fB/var/lock/conntrack.lock\fP. + +.TP +.BI "NetlinkBufferSize " +Netlink event socket buffer size. If you do not specify this clause, the +default buffer size value in \fB/proc/net/core/rmem_default\fP is used. This +default value is usually around \fB100 Kbytes\fP which is fairly small for +busy firewalls. This leads to event message dropping and high CPU consumption. + +Example: NetlinkBufferSize 2097152 + +.TP +.BI "NetlinkBufferSizeMaxGrowth " +The daemon doubles the size of the netlink event socket buffer size if it +detects netlink event message dropping. This clause sets the maximum buffer +size growth that can be reached. + +Example: NetlinkBufferSizeMaxGrowth 8388608 + +.TP +.BI "NetlinkOverrunResync " +If the daemon detects that Netlink is dropping state-change events, it +automatically schedules a resynchronization against the Kernel after 30 seconds +(default value). Resynchronizations are expensive in terms of CPU consumption +since the daemon has to get the full kernel state-table and purge state-entries +that do not exist anymore. + +Note: Be careful of setting a very small value here. + +Example: NetlinkOverrunResync on + +The default value is \fB30\fP seconds. +If not specified, the daemon assumes that this option is enabled and uses the +default value. + +.TP +.BI "NetlinkEventsReliable " +If you want reliable event reporting over Netlink, set on this option. If you +set on this clause, it is a good idea to set off \fBNetlinkOverrunResync\fP. + +You need \fBLinux Kernel >= 2.6.31\fP for this option to work. + +Example: NetlinkEventsReliable on + +This option is off by default. + +.TP +.BI "PollSecs " +By default, the daemon receives state updates following an event-driven model. +You can modify this behaviour by switching to polling mode with this clause. + +This clause tells \fBconntrackd(8)\fP to dump the states in the kernel every N +seconds. With regards to synchronization mode, the polling mode can only +guarantee that long-lifetime states are recovered. The main advantage of this +method is the reduction in the state replication at the cost of reducing the +chances of recovering connections. + +Example: PollSecs 15 + +.TP +.BI "EventIterationLimit " +The daemon prioritizes the handling of state-change events coming from the +core. With this clause, you can set the maximum number of state-change events +(those coming from kernel-space) that the daemon will handle after which it +will handle other events coming from the network or userspace. + +A low value improves interactivity (in terms of real-time behaviour) at the +cost of extra CPU consumption. + +Example: EventIterationLimit 100 + +Default (if not set) is 100. + +.SS UNIX +Unix socket configuration. This socket is used by \fBconntrackd(8)\fP to listen +to external commands like `\fIconntrackd -k\fP' or `\fIconntrackd -n\fP'. + +Example: +.nf + UNIX { + Path /var/run/conntrackd.ctl + Backlog 20 + } +.fi + +.TP +.BI "Path " +Absolute path to the Unix socket. + +Example: Path /var/run/conntrackd.ctl + +.TP +.BI "Backlog " +Number of items in the backlog. + +Example: Backlog 20 + +.SS FILTER +Event filtering. This clause allows you to filter certain traffic. + +There are currently three filter-sets: \fBProtocol\fP, \fBAddress\fP and +\fBState\fP. The filter is attached to an action that can be: \fBAccept\fP or +\fBIgnore\fP. Thus, you can define the event filtering policy of the +filter-sets in positive or negative logic depending on your needs. + +You can select if \fBconntrackd(8)\fP filters the event messages from +user-space or kernel-space. The kernel-space event filtering saves some CPU +cycles by avoiding the copy of the event message from kernel-space to +user-space. The kernel-space event filtering is prefered, however, you require +a \fBLinux kernel >= 2.6.29\fP to filter from kernel-space. + +The syntax for this section is: \fBFilter From { }\fP. + +If you want to select kernel-space event filtering, use the keyword +\fBKernelspace\fP instead of \fBUserspace\fP. + +Example: +.nf + Filter From Userspace { + Protocol Accept { + TCP + SCTP + DCCP + } + Address Ignore { + IPv4_address 127.0.0.1 + IPv6_address ::1 + } + State Accept { + ESTABLISHED CLOSED TIME_WAIT CLOSE_WAIT + } + } +.fi + +.TP +.BI "Protocol { }" +Accept only certain protocols: You may want to replicate the state of flows +depending on their layer 4 protocol. + +Policy is one of \fBAccept\fP or \fBIgnore\fP. + +Protocols are: \fBTCP\fP, \fBSCTP\fP, \fBDCCP\fP, \fBUDP\fP, \fBICMP\fP and +\fBIPv6-ICMP\fP. + +The \fBICMP\fP and \fBIPv6-ICMP\fP protocols require a +\fBLinux kernel >= 2.6.31\fP. + +Example: +.nf + Protocol Accept { + TCP + SCTP + DCCP + } +.fi + +.TP +.BI "Address { }" +Ignore traffic for a certain set of IP's: Usually all the IP assigned to the +firewall since local traffic must be ignored, only forwarded connections are +worth to replicate. + +Note that these values depends on the local IPs that are assigned to the +firewall. + +You may specify several \fBIPv4_address\fP and/or \fBIPv6_address\fP +directives. You can also specify networks in CIDR format. + +Policy is one of \fBAccept\fP or \fBIgnore\fP. + +Example: +.nf + Address Ignore { + IPv4_address 127.0.0.1 # loopback + IPv4_address 192.168.0.100 # virtual IP 1 + IPv4_address 192.168.1.100 # virtual IP 2 + IPv4_address 192.168.100.100 # dedicated link ip + IPv4_address 192.168.0.0/24 + IPv6_address ::1 + } +.fi + +.TP +.BI "State { }" +Filter by flow state. This option introduces a trade-off in the replication: +it reduces CPU consumption at the cost of having lazy backup firewall replicas. + +Note: only affects TCP flows. + +The existing TCP states are: \fBSYN_SENT\fP, \fBSYN_RECV\fP, \fBESTABLISHED\fP, +\fBFIN_WAIT\fP, \fBCLOSE_WAIT\fP, \fBLAST_ACK\fP, \fBTIME_WAIT\fP, +\fBCLOSED\fP and \fBLISTEN\fP. + +Policy is one of \fBAccept\fP or \fBIgnore\fP. + +Example: +.nf + State Accept { + ESTABLISHED CLOSED TIME_WAIT CLOSE_WAIT + } +.fi + +.SS SCHEDULER +Select a different scheduler for the daemon, you can select between \fBRR\fP +and \fBFIFO\fP and the process priority. + +See \fBsched_setscheduler(2)\fP for more information. Using a RT scheduler +reduces the chances to overrun the Netlink buffer. + +Example: +.nf + Scheduler { + Type FIFO + Priority 99 + } +.fi + +.TP +.BI "Type " +Supported values are \fBRR\fP or \fBFIFO\fP. + +.TP +.BI "Priority " +Value of the scheduler priority. + +Minimum is 0, maximum is 99. + +.SH STATS +This top-level section indicates \fBconntrackd(8)\fP to work as a statistic +collector for the nf_conntrack linux kernel subsystem. + +.TP +.BI "LogFile " +If you enable this option, the daemon writes the information about destroyed +connections to a logfile. + +Default is off. Default filename is \fB/var/log/conntrackd-stats.log\fP. + +.TP +.BI "NetlinkEventsReliable " +If you want reliable event reporting over Netlink, set on this option. If +you set on this clause, it is a good idea to set off +\fBNetlinkOverrunResync\fP. This requires \fBLinux kernel >= 2.6.31\fP. + +Default is off. + +.TP +.BI "Syslog " +Enable connection logging via Syslog. +If you set the facility, use the same as in the \fBGeneral\fP section, +otherwise you'll get a warning message. + +Example: Syslog local0 + +Default is off. + +.SH HELPER +Note: this configuration is very advanced and has nothing to do with +synchronization or stats collection. + +This top-level section indicates \fBconntrackd(8)\fP to inject user-space +helpers into the nf_conntrack linux kernel subsystem. +It will result in the nf_conntrack engine sending connections to userspace +for further processing. + +Before this, you have to make sure you have registered the given user-space +helper stub. + +Example: +.nf + % nfct add helper ftp inet tcp +.fi + +Each user-space helper should be registered using a Type section, which +are named this way: +.nf + \fBType \fP +.fi + +Examples: + +.nf +Helper { + Type ftp inet tcp { + QueueNum 0 + QueueLen 10240 + Policy ftp { + ExpectMax 1 + ExpectTimeout 300 + } + } + Type rpc inet tcp { + QueueNum 1 + QueueLen 10240 + Policy rpc { + ExpectMax 1 + ExpectTimeout 300 + } + } + Type rpc inet udp { + QueueNum 2 + QueueLen 10240 + Policy rpc { + ExpectMax 1 + ExpectTimeout 300 + } + } + Type tns inet tcp { + QueueNum 3 + QueueLen 10240 + Policy tns { + ExpectMax 1 + ExpectTimeout 300 + } + } + Type dhcpv6 inet6 udp { + QueueNum 4 + QueueLen 10240 + Policy dhcpv6 { + ExpectMax 1 + ExpectTimeout 300 + } + } + Type ssdp inet udp { + QueueNum 5 + QueueLen 10240 + Policy ssdp { + ExpectMax 1 + ExpectTimeout 300 + } + } +} +.fi + +Parameters inside the \fBType\fP section: + +.TP +.BI "QueueNum " +Set NFQUEUE number you want to use to receive traffic from the kernel. + +Example: QueueNum 0 + +.TP +.BI "QueueLen " +Maximum number of packets waiting in the queue to receive a verdict from +user-space. + +Rise value if you hit the following error message: +.nf + "nf_queue: full at X entries, dropping packet(s)" +.fi + +Default is 1024. + +Example: QueueLen 10240 + +.TP +.BI "Policy { }" +Set the expectation policy for the given helper. + +This sub-section contains 2 directives: +\fBExpectMax \fP (maximum number of simultaneous expectations) +and \fBExpecTimeout \fP (maximum living time for one expectation). + +.SH COMPLETE EXAMPLES +Find below some real-life working examples. + +.SS STATS EXAMPLE +This configuration example tells \fBconntrackd(8)\fP to work as a stats +collector. + +.nf +Stats { + LogFile on + NetlinkEventsReliable Off + Syslog off +} +General { + Systemd on + Nice -1 + HashSize 8192 + HashLimit 65535 + Syslog on + LockFile /var/lock/conntrack.lock + UNIX { + Path /var/run/conntrackd.ctl + Backlog 20 + } + NetlinkBufferSize 262142 + NetlinkBufferSizeMaxGrowth 655355 + Filter { + Protocol Accept { + TCP + UDP + } + Address Ignore { + IPv4_address 127.0.0.1 + IPv6_address ::1 + } + } +} +.fi + +.SS SYNC EXAMPLE 1 +This example configures synchronization in \fBFTFW\fP mode with \fBMulticast\fP +transport. + +It includes common general configuration as well. + +Note: this is one of the recommended setups for \fBconntrackd(8)\fP in a +firewall cluster environment. + +.nf +Sync { + Mode FTFW { + ResendQueueSize 131072 + PurgeTimeout 60 + ACKWindowSize 300 + DisableExternalCache Off + } + Multicast { + IPv4_address 225.0.0.50 + Group 3780 + IPv4_interface 192.168.100.100 + Interface eth2 + SndSocketBuffer 1249280 + RcvSocketBuffer 1249280 + Checksum on + } + Multicast Default { + IPv4_address 225.0.0.51 + Group 3781 + IPv4_interface 192.168.100.101 + Interface eth3 + SndSocketBuffer 1249280 + RcvSocketBuffer 1249280 + Checksum on + } + Options { + TCPWindowTracking Off + ExpectationSync On + } +} +General { + Systemd on + Nice -20 + Scheduler { + Type FIFO + Priority 99 + } + HashSize 32768 + HashLimit 131072 + LogFile on + Syslog off + LockFile /var/lock/conntrack.lock + UNIX { + Path /var/run/conntrackd.ctl + Backlog 20 + } + NetlinkBufferSize 2097152 + NetlinkBufferSizeMaxGrowth 8388608 + NetlinkOverrunResync On + NetlinkEventsReliable Off + EventIterationLimit 100 + Filter From Userspace { + Protocol Accept { + TCP + SCTP + DCCP + } + Address Ignore { + IPv4_address 127.0.0.1 + IPv4_address 192.168.100.0/24 + IPv6_address ::1 + } + } +} +.fi + +.SS SYNC EXAMPLE 2 + +This example configures synchronization in \fBNOTRACK\fP mode with \fBTCP\fP +transport. + +It includes common general configuration as well. + +.nf +Sync { + Mode NOTRACK { + DisableInternalCache on + DisableExternalCache on + } + TCP { + IPv4_address 192.168.2.100 + IPv4_Destination_Address 192.168.2.101 + Port 3780 + Interface eth2 + SndSocketBuffer 1249280 + RcvSocketBuffer 1249280 + Checksum on + } + Options { + TCPWindowTracking Off + ExpectationSync On + } +} +General { + Systemd on + Nice -20 + Scheduler { + Type FIFO + Priority 99 + } + HashSize 32768 + HashLimit 131072 + LogFile on + Syslog off + LockFile /var/lock/conntrack.lock + UNIX { + Path /var/run/conntrackd.ctl + Backlog 20 + } + NetlinkBufferSize 2097152 + NetlinkBufferSizeMaxGrowth 8388608 + NetlinkOverrunResync On + NetlinkEventsReliable Off + EventIterationLimit 100 + Filter From Userspace { + Protocol Accept { + TCP + SCTP + DCCP + } + Address Ignore { + IPv4_address 127.0.0.1 + IPv4_address 192.168.0.0/16 + IPv6_address ::1 + } + State Accept { + ESTABLISHED CLOSED TIME_WAIT CLOSE_WAIT + } + } +} +.fi + + +.SH SEE ALSO +.BR conntrackd(8), +.BR conntrack(8), +.BR nfct(8), +.BR http://conntrack-tools.netfilter.org/manual.html + +.SH AUTHOR +Pablo Neira Ayuso wrote and maintains the conntrackd tool. + +This manual page was written by Arturo Borrero González + based on the conntrackd tarball config +examples. + +Please send bug reports to . Subscription is required. + +This documentation is free/libre under the terms of the GPLv2+. -- cgit v1.2.3