# Create sets and inet rules which call set match and SET target 0 ./iptables.sh inet start # Send probe packet from 10.255.255.64,tcp:1025 0 sendip -p ipv4 -id 127.0.0.1 -is 10.255.255.64 -p tcp -td 80 -ts 1025 127.0.0.1 # Check that proper sets matched and target worked 0 ./check_klog.sh 10.255.255.64 tcp 1025 ipport list # Send probe packet from 10.255.255.64,udp:1025 0 sendip -p ipv4 -id 127.0.0.1 -is 10.255.255.64 -p udp -ud 80 -us 1025 127.0.0.1 # Check that proper sets matched and target worked 0 ./check_klog.sh 10.255.255.64 udp 1025 ipport list # Send probe packet from 10.255.255.1,tcp:1025 0 sendip -p ipv4 -id 127.0.0.1 -is 10.255.255.1 -p tcp -td 80 -ts 1025 127.0.0.1 # Check that proper sets matched and target worked 0 ./check_klog.sh 10.255.255.1 tcp 1025 ip1 list # Send probe packet from 10.255.255.32,tcp:1025 0 sendip -p ipv4 -id 127.0.0.1 -is 10.255.255.32 -p tcp -td 80 -ts 1025 127.0.0.1 # Check that proper sets matched and target worked 0 ./check_klog.sh 10.255.255.32 tcp 1025 ip2 # Destroy sets and rules 0 ./iptables.sh inet stop # eof