# Create sets and inet6 rules which call set match and SET target 0 ./iptables.sh inet6 start # Send probe packet from 1002:1002:1002:1002::64,tcp:1025 0 sendip -p ipv6 -6d ::1 -6s 1002:1002:1002:1002::64 -p tcp -td 80 -ts 1025 ::1 # Check that proper sets matched and target worked 0 ./check_klog.sh 1002:1002:1002:1002::64 tcp 1025 ipport list # Send probe packet from 1002:1002:1002:1002::64,udp:1025 0 sendip -p ipv6 -6d ::1 -6s 1002:1002:1002:1002::64 -p udp -ud 80 -us 1025 ::1 # Check that proper sets matched and target worked 0 ./check_klog.sh 1002:1002:1002:1002::64 udp 1025 ipport list # Send probe packet from 1002:1002:1002:1002::1,tcp:1025 0 sendip -p ipv6 -6d ::1 -6s 1002:1002:1002:1002::1 -p tcp -td 80 -ts 1025 ::1 # Check that proper sets matched and target worked 0 ./check_klog.sh 1002:1002:1002:1002::1 tcp 1025 ip1 list # Send probe packet from 1002:1002:1002:1002::32,tcp:1025 0 sendip -p ipv6 -6d ::1 -6s 1002:1002:1002:1002::32 -p tcp -td 80 -ts 1025 ::1 # Check that proper sets matched and target worked 0 ./check_klog.sh 1002:1002:1002:1002::32 tcp 1025 ip2 # Destroy sets and rules 0 ./iptables.sh inet6 stop # eof