src: move all iptables pieces into a separate directory

(Unclutter top-level dir)

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>

1 files changed, 0 insertions, 440 deletions

diff --git a/ip6tables.8.in b/ip6tables.8.in
deleted file mode 100644
index 48ba18e1..00000000
--- a/ip6tables.8.in
+++ /dev/null
@@ -1,440 +0,0 @@
-.TH IP6TABLES 8 "" "iptables 1.4.4" "iptables 1.4.4"
-.\"
-.\" Man page written by Andras Kis-Szabo <kisza@sch.bme.hu>
-.\" It is based on iptables man page.
-.\"
-.\" iptables page by Herve Eychenne <rv@wallfire.org>
-.\" It is based on ipchains man page.
-.\"
-.\" ipchains page by Paul ``Rusty'' Russell March 1997
-.\" Based on the original ipfwadm man page by Jos Vos <jos@xos.nl>
-.\"
-.\"	This program is free software; you can redistribute it and/or modify
-.\"	it under the terms of the GNU General Public License as published by
-.\"	the Free Software Foundation; either version 2 of the License, or
-.\"	(at your option) any later version.
-.\"
-.\"	This program is distributed in the hope that it will be useful,
-.\"	but WITHOUT ANY WARRANTY; without even the implied warranty of
-.\"	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-.\"	GNU General Public License for more details.
-.\"
-.\"	You should have received a copy of the GNU General Public License
-.\"	along with this program; if not, write to the Free Software
-.\"	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-.\"
-.\"
-.SH NAME
-ip6tables \(em IPv6 packet filter administration
-.SH SYNOPSIS
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] {\fB\-A\fP|\fB\-C\fP|\fB\-D\fP}
-\fIchain rule-specification\fP [\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-I\fP \fIchain\fP [\fIrulenum\fP]
-\fIrule-specification\fP [\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-R\fP \fIchain rulenum
-rule-specification\fP [\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-D\fP \fIchain rulenum\fP
-[\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-S\fP [\fIchain\fP [\fIrulenum\fP]]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] {\fB\-F\fP|\fB\-L\fP|\fB\-Z\fP}
-[\fIchain\fP [\fIrulenum\fP]] [\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-N\fP \fIchain\fP
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-X\fP [\fIchain\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-P\fP \fIchain target\fP
-[\fIoptions...\fP]
-.PP
-\fBip6tables\fP [\fB\-t\fP \fItable\fP] \fB\-E\fP \fIold-chain-name new-chain-name\fP
-.SH DESCRIPTION
-\fBIp6tables\fP is used to set up, maintain, and inspect the
-tables of IPv6 packet
-filter rules in the Linux kernel.  Several different tables
-may be defined.  Each table contains a number of built-in
-chains and may also contain user-defined chains.
-.PP
-Each chain is a list of rules which can match a set of packets.  Each
-rule specifies what to do with a packet that matches.  This is called
-a `target', which may be a jump to a user-defined chain in the same
-table.
-.SH TARGETS
-A firewall rule specifies criteria for a packet and a target.  If the
-packet does not match, the next rule in the chain is the examined; if
-it does match, then the next rule is specified by the value of the
-target, which can be the name of a user-defined chain or one of the
-special values \fBACCEPT\fP, \fBDROP\fP, \fBQUEUE\fP or \fBRETURN\fP.
-.PP
-\fBACCEPT\fP means to let the packet through.
-\fBDROP\fP means to drop the packet on the floor.
-\fBQUEUE\fP means to pass the packet to userspace.
-(How the packet can be received
-by a userspace process differs by the particular queue handler.  2.4.x
-and 2.6.x kernels up to 2.6.13 include the \fBip_queue\fP
-queue handler.  Kernels 2.6.14 and later additionally include the
-\fBnfnetlink_queue\fP queue handler.  Packets with a target of QUEUE will be
-sent to queue number '0' in this case. Please also see the \fBNFQUEUE\fP
-target as described later in this man page.)
-\fBRETURN\fP means stop traversing this chain and resume at the next
-rule in the
-previous (calling) chain.  If the end of a built-in chain is reached
-or a rule in a built-in chain with target \fBRETURN\fP
-is matched, the target specified by the chain policy determines the
-fate of the packet.
-.SH TABLES
-There are currently three independent tables (which tables are present
-at any time depends on the kernel configuration options and which
-modules are present).
-.TP
-\fB\-t\fP, \fB\-\-table\fP \fItable\fP
-This option specifies the packet matching table which the command
-should operate on.  If the kernel is configured with automatic module
-loading, an attempt will be made to load the appropriate module for
-that table if it is not already there.
-
-The tables are as follows:
-.RS
-.TP .4i
-\fBfilter\fP:
-This is the default table (if no \-t option is passed). It contains
-the built-in chains \fBINPUT\fP (for packets destined to local sockets),
-\fBFORWARD\fP (for packets being routed through the box), and
-\fBOUTPUT\fP (for locally-generated packets).
-.TP
-\fBmangle\fP:
-This table is used for specialized packet alteration.  Until kernel
-2.4.17 it had two built-in chains: \fBPREROUTING\fP
-(for altering incoming packets before routing) and \fBOUTPUT\fP
-(for altering locally-generated packets before routing).
-Since kernel 2.4.18, three other built-in chains are also supported:
-\fBINPUT\fP (for packets coming into the box itself), \fBFORWARD\fP
-(for altering packets being routed through the box), and \fBPOSTROUTING\fP
-(for altering packets as they are about to go out).
-.TP
-\fBraw\fP:
-This table is used mainly for configuring exemptions from connection
-tracking in combination with the NOTRACK target.  It registers at the netfilter
-hooks with higher priority and is thus called before ip_conntrack, or any other
-IP tables.  It provides the following built-in chains: \fBPREROUTING\fP
-(for packets arriving via any network interface) \fBOUTPUT\fP
-(for packets generated by local processes)
-.TP
-\fBsecurity\fP:
-This table is used for Mandatory Access Control (MAC) networking rules, such
-as those enabled by the \fBSECMARK\fP and \fBCONNSECMARK\fP targets.
-Mandatory Access Control is implemented by Linux Security Modules such as
-SELinux.  The security table is called after the filter table, allowing any
-Discretionary Access Control (DAC) rules in the filter table to take effect
-before MAC rules.  This table provides the following built-in chains:
-\fBINPUT\fP (for packets coming into the box itself),
-\fBOUTPUT\fP (for altering locally-generated packets before routing), and
-\fBFORWARD\fP (for altering packets being routed through the box).
-.RE
-.SH OPTIONS
-The options that are recognized by
-\fBip6tables\fP can be divided into several different groups.
-.SS COMMANDS
-These options specify the specific action to perform.  Only one of them
-can be specified on the command line unless otherwise specified
-below.  For all the long versions of the command and option names, you
-need to use only enough letters to ensure that
-\fBip6tables\fP can differentiate it from all other options.
-.TP
-\fB\-A\fP, \fB\-\-append\fP \fIchain rule-specification\fP
-Append one or more rules to the end of the selected chain.
-When the source and/or destination names resolve to more than one
-address, a rule will be added for each possible address combination.
-.TP
-\fB\-C\fP, \fB\-\-check\fP \fIchain rule-specification\fP
-Check whether a rule matching the specification does exist in the
-selected chain. This command uses the same logic as \fB\-D\fP to
-find a matching entry, but does not alter the existing iptables
-configuration and uses its exit code to indicate success or failure.
-.TP
-\fB\-D\fP, \fB\-\-delete\fP \fIchain rule-specification\fP
-.ns
-.TP
-\fB\-D\fP, \fB\-\-delete\fP \fIchain rulenum\fP
-Delete one or more rules from the selected chain.  There are two
-versions of this command: the rule can be specified as a number in the
-chain (starting at 1 for the first rule) or a rule to match.
-.TP
-\fB\-I\fP, \fB\-\-insert\fP \fIchain\fP [\fIrulenum\fP] \fIrule-specification\fP
-Insert one or more rules in the selected chain as the given rule
-number.  So, if the rule number is 1, the rule or rules are inserted
-at the head of the chain.  This is also the default if no rule number
-is specified.
-.TP
-\fB\-R\fP, \fB\-\-replace\fP \fIchain rulenum rule-specification\fP
-Replace a rule in the selected chain.  If the source and/or
-destination names resolve to multiple addresses, the command will
-fail.  Rules are numbered starting at 1.
-.TP
-\fB\-L\fP, \fB\-\-list\fP [\fIchain\fP]
-List all rules in the selected chain.  If no chain is selected, all
-chains are listed. Like every other ip6tables command, it applies to the
-specified table (filter is the default).
-.IP ""
-Please note that it is often used with the \fB\-n\fP
-option, in order to avoid long reverse DNS lookups.
-It is legal to specify the \fB\-Z\fP
-(zero) option as well, in which case the chain(s) will be atomically
-listed and zeroed.  The exact output is affected by the other
-arguments given. The exact rules are suppressed until you use
-.nf
- ip6tables \-L \-v
-.fi
-.TP
-\fB\-S\fP, \fB\-\-list\-rules\fP [\fIchain\fP]
-Print all rules in the selected chain.  If no chain is selected, all
-chains are printed like ip6tables-save. Like every other ip6tables command,
-it applies to the specified table (filter is the default).
-.TP
-\fB\-F\fP, \fB\-\-flush\fP [\fIchain\fP]
-Flush the selected chain (all the chains in the table if none is given).
-This is equivalent to deleting all the rules one by one.
-.TP
-\fB\-Z\fP, \fB\-\-zero\fP [\fIchain\fP [\fIrulenum\fP]]
-Zero the packet and byte counters in all chains, or only the given chain,
-or only the given rule in a chain. It is legal to
-specify the
-\fB\-L\fP, \fB\-\-list\fP
-(list) option as well, to see the counters immediately before they are
-cleared. (See above.)
-.TP
-\fB\-N\fP, \fB\-\-new\-chain\fP \fIchain\fP
-Create a new user-defined chain by the given name.  There must be no
-target of that name already.
-.TP
-\fB\-X\fP, \fB\-\-delete\-chain\fP [\fIchain\fP]
-Delete the optional user-defined chain specified.  There must be no references
-to the chain.  If there are, you must delete or replace the referring rules
-before the chain can be deleted.  The chain must be empty, i.e. not contain
-any rules.  If no argument is given, it will attempt to delete every
-non-builtin chain in the table.
-.TP
-\fB\-P\fP, \fB\-\-policy\fP \fIchain target\fP
-Set the policy for the chain to the given target.  See the section \fBTARGETS\fP
-for the legal targets.  Only built-in (non-user-defined) chains can have
-policies, and neither built-in nor user-defined chains can be policy
-targets.
-.TP
-\fB\-E\fP, \fB\-\-rename\-chain\fP \fIold\-chain new\-chain\fP
-Rename the user specified chain to the user supplied name.  This is
-cosmetic, and has no effect on the structure of the table.
-.TP
-\fB\-A\fP, \fB\-\-append\fP \fIchain rule-specification\fP
-Append one or more rules to the end of the selected chain.
-When the source and/or destination names resolve to more than one
-address, a rule will be added for each possible address combination.
-.TP
-\fB\-h\fP
-Help.
-Give a (currently very brief) description of the command syntax.
-.SS PARAMETERS
-The following parameters make up a rule specification (as used in the
-add, delete, insert, replace and append commands).
-.TP
-[\fB!\fP] \fB\-p\fP, \fB\-\-protocol\fP \fIprotocol\fP
-The protocol of the rule or of the packet to check.
-The specified protocol can be one of \fBtcp\fP, \fBudp\fP, \fBudplite\fP,
-\fBicmpv6\fP, \fBesp\fP, \fBmh\fP or the special keyword "\fBall\fP",
-or it can be a numeric value, representing one of these protocols or a
-different one. A protocol name from /etc/protocols is also allowed.
-But IPv6 extension headers except \fBesp\fP are not allowed.
-\fBesp\fP and \fBipv6\-nonext\fP
-can be used with Kernel version 2.6.11 or later.
-A "!" argument before the protocol inverts the
-test.  The number zero is equivalent to \fBall\fP. "\fBall\fP"
-will match with all protocols and is taken as default when this
-option is omitted.
-.TP
-[\fB!\fP] \fB\-s\fP, \fB\-\-source\fP \fIaddress\fP[\fB/\fP\fImask\fP]
-Source specification.
-\fIAddress\fP can be either be a hostname,
-a network IP address (with \fB/\fP\fImask\fP), or a plain IP address.
-Names will be resolved once only, before the rule is submitted to the kernel.
-Please note that specifying any name to be resolved with a remote query such as
-DNS is a really bad idea.
-(Resolving network names is not supported at this time.)
-The \fImask\fP is a plain number,
-specifying the number of 1's at the left side of the network mask.
-A "!" argument before the address specification inverts the sense of
-the address. The flag \fB\-\-src\fP
-is an alias for this option.
-Multiple addresses can be specified, but this will \fBexpand to multiple
-rules\fP (when adding with \-A), or will cause multiple rules to be
-deleted (with \-D).
-.TP
-[\fB!\fP] \fB\-d\fP, \fB\-\-destination\fP \fIaddress\fP[\fB/\fP\fImask\fP]
-Destination specification. 
-See the description of the \fB\-s\fP
-(source) flag for a detailed description of the syntax.  The flag
-\fB\-\-dst\fP is an alias for this option.
-.TP
-\fB\-j\fP, \fB\-\-jump\fP \fItarget\fP
-This specifies the target of the rule; i.e., what to do if the packet
-matches it.  The target can be a user-defined chain (other than the
-one this rule is in), one of the special builtin targets which decide
-the fate of the packet immediately, or an extension (see \fBEXTENSIONS\fP
-below).  If this
-option is omitted in a rule (and \fB\-g\fP
-is not used), then matching the rule will have no
-effect on the packet's fate, but the counters on the rule will be
-incremented.
-.TP
-\fB\-g\fP, \fB\-\-goto\fP \fIchain\fP
-This specifies that the processing should continue in a user
-specified chain. Unlike the \-\-jump option return will not continue
-processing in this chain but instead in the chain that called us via
-\-\-jump.
-.TP
-[\fB!\fP] \fB\-i\fP, \fB\-\-in\-interface\fP \fIname\fP
-Name of an interface via which a packet was received (only for
-packets entering the \fBINPUT\fP, \fBFORWARD\fP and \fBPREROUTING\fP
-chains).  When the "!" argument is used before the interface name, the
-sense is inverted.  If the interface name ends in a "+", then any
-interface which begins with this name will match.  If this option is
-omitted, any interface name will match.
-.TP
-[\fB!\fP] \fB\-o\fP, \fB\-\-out\-interface\fP \fIname\fP
-Name of an interface via which a packet is going to be sent (for packets
-entering the \fBFORWARD\fP, \fBOUTPUT\fP and \fBPOSTROUTING\fP
-chains).  When the "!" argument is used before the interface name, the
-sense is inverted.  If the interface name ends in a "+", then any
-interface which begins with this name will match.  If this option is
-omitted, any interface name will match.
-.\" Currently not supported (header-based)
-.\" .TP
-.\" [\fB!\fP] \fB\-f\fP, \fB\-\-fragment\fP
-.\" This means that the rule only refers to second and further fragments
-.\" of fragmented packets.  Since there is no way to tell the source or
-.\" destination ports of such a packet (or ICMP type), such a packet will
-.\" not match any rules which specify them.  When the "!" argument
-.\" precedes the "\-f" flag, the rule will only match head fragments, or
-.\" unfragmented packets.
-.TP
-\fB\-c\fP, \fB\-\-set\-counters\fP \fIpackets bytes\fP
-This enables the administrator to initialize the packet and byte
-counters of a rule (during \fBINSERT\fP, \fBAPPEND\fP, \fBREPLACE\fP
-operations).
-.SS "OTHER OPTIONS"
-The following additional options can be specified:
-.TP
-\fB\-v\fP, \fB\-\-verbose\fP
-Verbose output.  This option makes the list command show the interface
-name, the rule options (if any), and the TOS masks.  The packet and
-byte counters are also listed, with the suffix 'K', 'M' or 'G' for
-1000, 1,000,000 and 1,000,000,000 multipliers respectively (but see
-the \fB\-x\fP flag to change this).
-For appending, insertion, deletion and replacement, this causes
-detailed information on the rule or rules to be printed.
-.TP
-\fB\-n\fP, \fB\-\-numeric\fP
-Numeric output.
-IP addresses and port numbers will be printed in numeric format.
-By default, the program will try to display them as host names,
-network names, or services (whenever applicable).
-.TP
-\fB\-x\fP, \fB\-\-exact\fP
-Expand numbers.
-Display the exact value of the packet and byte counters,
-instead of only the rounded number in K's (multiples of 1000)
-M's (multiples of 1000K) or G's (multiples of 1000M).  This option is
-only relevant for the \fB\-L\fP command.
-.TP
-\fB\-\-line\-numbers\fP
-When listing rules, add line numbers to the beginning of each rule,
-corresponding to that rule's position in the chain.
-.TP
-\fB\-\-modprobe=\fP\fIcommand\fP
-When adding or inserting rules into a chain, use \fIcommand\fP
-to load any necessary modules (targets, match extensions, etc).
-.SH MATCH EXTENSIONS
-ip6tables can use extended packet matching modules.  These are loaded
-in two ways: implicitly, when \fB\-p\fP or \fB\-\-protocol\fP
-is specified, or with the \fB\-m\fP or \fB\-\-match\fP
-options, followed by the matching module name; after these, various
-extra command line options become available, depending on the specific
-module.  You can specify multiple extended match modules in one line,
-and you can use the \fB\-h\fP or \fB\-\-help\fP
-options after the module has been specified to receive help specific
-to that module.
-.PP
-The following are included in the base package, and most of these can
-be preceded by a "\fB!\fP" to invert the sense of the match.
-.\" @MATCH@
-.SH TARGET EXTENSIONS
-ip6tables can use extended target modules: the following are included
-in the standard distribution.
-.\" @TARGET@
-.SH DIAGNOSTICS
-Various error messages are printed to standard error.  The exit code
-is 0 for correct functioning.  Errors which appear to be caused by
-invalid or abused command line parameters cause an exit code of 2, and
-other errors cause an exit code of 1.
-.SH BUGS
-Bugs?  What's this? ;-)
-Well... the counters are not reliable on sparc64.
-.SH COMPATIBILITY WITH IPCHAINS
-This \fBip6tables\fP
-is very similar to ipchains by Rusty Russell.  The main difference is
-that the chains \fBINPUT\fP and \fBOUTPUT\fP
-are only traversed for packets coming into the local host and
-originating from the local host respectively.  Hence every packet only
-passes through one of the three chains (except loopback traffic, which
-involves both INPUT and OUTPUT chains); previously a forwarded packet
-would pass through all three.
-.PP
-The other main difference is that \fB\-i\fP refers to the input interface;
-\fB\-o\fP refers to the output interface, and both are available for packets
-entering the \fBFORWARD\fP chain.
-There are several other changes in ip6tables.
-.SH SEE ALSO
-\fBip6tables\-save\fP(8),
-\fBip6tables\-restore\fP(8),
-\fBiptables\fP(8),
-\fBiptables\-save\fP(8),
-\fBiptables\-restore\fP(8),
-\fBlibipq\fP(3).
-.PP
-The packet-filtering-HOWTO details iptables usage for
-packet filtering,
-the netfilter-extensions-HOWTO details the extensions that are
-not in the standard distribution,
-and the netfilter-hacking-HOWTO details the netfilter internals.
-.br
-See
-.BR "http://www.netfilter.org/" .
-.SH AUTHORS
-Rusty Russell wrote iptables, in early consultation with Michael
-Neuling.
-.PP
-Marc Boucher made Rusty abandon ipnatctl by lobbying for a generic packet
-selection framework in iptables, then wrote the mangle table, the owner match,
-the mark stuff, and ran around doing cool stuff everywhere.
-.PP
-James Morris wrote the TOS target, and tos match.
-.PP
-Jozsef Kadlecsik wrote the REJECT target.
-.PP
-Harald Welte wrote the ULOG and NFQUEUE target, the new libiptc, as well as TTL match+target and libipulog.
-.PP
-The Netfilter Core Team is: Marc Boucher, Martin Josefsson, Yasuyuki Kozakai,
-Jozsef Kadlecsik, Patrick McHardy, James Morris, Pablo Neira Ayuso,
-Harald Welte and Rusty Russell.
-.PP
-ip6tables man page created by Andras Kis-Szabo, based on
-iptables man page written by Herve Eychenne <rv@wallfire.org>.
-.\" .. and did I mention that we are incredibly cool people?
-.\" .. sexy, too ..
-.\" .. witty, charming, powerful ..
-.\" .. and most of all, modest ..
-.SH VERSION
-.PP
-This manual page applies to ip6tables @PACKAGE_VERSION@.