summaryrefslogtreecommitdiffstats
path: root/iptables.8
diff options
context:
space:
mode:
authorHarald Welte <laforge@gnumonks.org>2003-02-14 07:34:09 +0000
committerHarald Welte <laforge@gnumonks.org>2003-02-14 07:34:09 +0000
commit282d669c55766a1a9f8789d7e1abb09adcc96920 (patch)
tree81c991ea66356f81b2b15c07889a24a7e0b6c6ad /iptables.8
parent1254871c88483cc1a0adc448a83cab6a9d4510a1 (diff)
alphabetize manpage + libipt_physdev section
Diffstat (limited to 'iptables.8')
-rw-r--r--iptables.8621
1 files changed, 326 insertions, 295 deletions
diff --git a/iptables.8 b/iptables.8
index 3113b94d..db9a691b 100644
--- a/iptables.8
+++ b/iptables.8
@@ -376,71 +376,75 @@ The following are included in the base package, and most of these can
be preceded by a
.B !
to invert the sense of the match.
-.SS tcp
-These extensions are loaded if `--protocol tcp' is specified. It
-provides the following options:
+.SS ah
+This module matches the SPIs in AH header of IPSec packets.
.TP
-.BR "--source-port " "[!] \fIport\fP[:\fIport\fP]"
-Source port or port range specification. This can either be a service
-name or a port number. An inclusive range can also be specified,
-using the format
-.IR port : port .
-If the first port is omitted, "0" is assumed; if the last is omitted,
-"65535" is assumed.
-If the second port greater then the first they will be swapped.
-The flag
-.B --sport
-is a convenient alias for this option.
+.BR "--ahspi " "[!] \fIspi\fP[:\fIspi\fP]"
+.SS conntrack
+This module, when combined with connection tracking, allows access to
+more connection tracking information than the "state" match.
+(this module is present only if iptables was compiled under a kernel
+supporting this feature)
.TP
-.BR "--destination-port " "[!] \fIport\fP[:\fIport\fP]"
-Destination port or port range specification. The flag
-.B --dport
-is a convenient alias for this option.
+.BI "--ctstate " "state"
+Where state is a comma separated list of the connection states to
+match. Possible states are
+.B INVALID
+meaning that the packet is associated with no known connection,
+.B ESTABLISHED
+meaning that the packet is associated with a connection which has seen
+packets in both directions,
+.B NEW
+meaning that the packet has started a new connection, or otherwise
+associated with a connection which has not seen packets in both
+directions, and
+.B RELATED
+meaning that the packet is starting a new connection, but is
+associated with an existing connection, such as an FTP data transfer,
+or an ICMP error.
+.B SNAT
+A virtual state, matching if the original source address differs from
+the reply destination.
+.B DNAT
+A virtual state, matching if the original destination differs from the
+reply source.
.TP
-.BR "--tcp-flags " "[!] \fImask\fP \fIcomp\fP"
-Match when the TCP flags are as specified. The first argument is the
-flags which we should examine, written as a comma-separated list, and
-the second argument is a comma-separated list of flags which must be
-set. Flags are:
-.BR "SYN ACK FIN RST URG PSH ALL NONE" .
-Hence the command
-.br
- iptables -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN,RST SYN
-.br
-will only match packets with the SYN flag set, and the ACK, FIN and
-RST flags unset.
+.BI "--ctproto " "proto"
+Protocol to match (by number or name)
.TP
-.B "[!] --syn"
-Only match TCP packets with the SYN bit set and the ACK and RST bits
-cleared. Such packets are used to request TCP connection initiation;
-for example, blocking such packets coming in an interface will prevent
-incoming TCP connections, but outgoing TCP connections will be
-unaffected.
-It is equivalent to \fB--tcp-flags SYN,RST,ACK SYN\fP.
-If the "!" flag precedes the "--syn", the sense of the
-option is inverted.
+.BI "--ctorigsrc " "[!] \fIaddress\fP[/\fImask\fP]"
+Match against original source address
.TP
-.BR "--tcp-option " "[!] \fInumber\fP"
-Match if TCP option set.
+.BI "--ctorigdst " "[!] \fIaddress\fP[/\fImask\fP]"
+Match against original destination address
.TP
-.BR "--mss " "\fIvalue\fP[:\fIvalue\fP]"
-Match TCP SYN or SYN/ACK packets with the specified MSS value (or range),
-which control the maximum packet size for that connection.
-.SS udp
-These extensions are loaded if `--protocol udp' is specified. It
-provides the following options:
+.BI "--ctreplsrc " "[!] \fIaddress\fP[/\fImask\fP]"
+Match against reply source address
.TP
-.BR "--source-port " "[!] \fIport\fP[:\fIport\fP]"
-Source port or port range specification.
-See the description of the
-.B --source-port
-option of the TCP extension for details.
+.BI "--ctrepldst " "[!] \fIaddress\fB[/\fImask\fP]"
+Match against reply destination address
.TP
-.BR "--destination-port " "[!] \fIport\fP[:\fIport\fP]"
-Destination port or port range specification.
-See the description of the
-.B --destination-port
-option of the TCP extension for details.
+.BI "--ctstatus " "[\fINONE|EXPECTED|SEEN_REPLY|ASSURED\fP][,...]"
+Match against internal conntrack states
+.TP
+.BI "--ctexpire " "\fItime\fP[\fI:time\fP]"
+Match remaining lifetime in seconds against given value
+or range of values (inclusive)
+.SS dscp
+This module matches the 6 bit DSCP field within the TOS field in the
+IP header. DSCP has superseded TOS within the IETF.
+.TP
+.BI "--dscp " "value"
+Match against a numeric (decimal or hex) value [0-32].
+.TP
+.BI "--dscp-class " "\fIDiffServ Class\fP"
+Match the DiffServ class. This value may be any of the
+BE, EF, AFxx or CSx classes. It will then be converted
+into it's according numeric value.
+.SS esp
+This module matches the SPIs in ESP header of IPSec packets.
+.TP
+.BR "--espspi " "[!] \fIspi\fP[:\fIspi\fP]"
.SS icmp
This extension is loaded if `--protocol icmp' is specified. It
provides the following option:
@@ -451,17 +455,11 @@ ICMP type, or one of the ICMP type names shown by the command
.br
iptables -p icmp -h
.br
-.SS mac
+.SS length
+This module matches the length of a packet against a specific value
+or range of values.
.TP
-.BR "--mac-source " "[!] \fIaddress\fP"
-Match source MAC address. It must be of the form XX:XX:XX:XX:XX:XX.
-Note that this only makes sense for packets coming from an Ethernet device
-and entering the
-.BR PREROUTING ,
-.B FORWARD
-or
-.B INPUT
-chains.
+.BR "--length " "\fIlength\fP[:\fIlength\fP]"
.SS limit
This module matches at a limited rate using a token bucket filter.
A rule using this extension will match until this limit is reached
@@ -478,6 +476,27 @@ Maximum average matching rate: specified as a number, with an optional
Maximum initial number of packets to match: this number gets
recharged by one every time the limit specified above is not reached,
up to this number; the default is 5.
+.SS mac
+.TP
+.BR "--mac-source " "[!] \fIaddress\fP"
+Match source MAC address. It must be of the form XX:XX:XX:XX:XX:XX.
+Note that this only makes sense for packets coming from an Ethernet device
+and entering the
+.BR PREROUTING ,
+.B FORWARD
+or
+.B INPUT
+chains.
+.SS mark
+This module matches the netfilter mark field associated with a packet
+(which can be set using the
+.B MARK
+target below).
+.TP
+.BR "--mark " "\fIvalue\fP[/\fImask\fP]"
+Matches packets with the given unsigned mark value (if a mask is
+specified, this is logically ANDed with the mask before the
+comparison).
.SS multiport
This module matches a set of source or destination ports. Up to 15
ports can be specified. It can only be used in conjunction with
@@ -498,16 +517,6 @@ is a convenient alias for this option.
.BR "--ports " "\fIport\fP[,\fIport\fP[,\fIport\fP...]]"
Match if the both the source and destination ports are equal to each
other and to one of the given ports.
-.SS mark
-This module matches the netfilter mark field associated with a packet
-(which can be set using the
-.B MARK
-target below).
-.TP
-.BR "--mark " "\fIvalue\fP[/\fImask\fP]"
-Matches packets with the given unsigned mark value (if a mask is
-specified, this is logically ANDed with the mask before the
-comparison).
.SS owner
This module attempts to match various characteristics of the packet
creator, for locally-generated packets. It is only valid in the
@@ -535,35 +544,48 @@ group.
Matches if the packet was created by a process with the given command name.
(this option is present only if iptables was compiled under a kernel
supporting this feature)
+.SS physdev
+This module matches on the bridge port input and output devices enslaved
+to a bridge device. This is only useful if the input device or output device
+is a bridge device. This module is a part of the infrastructure that enables
+a transparent bridging IP firewall and is only useful for kernel versions
+above version 2.5.44.
+.TP
+.B --physdev-in name
+Name of a bridge port via which a packet is received (only for
+packets entering the
+.BR INPUT ,
+.B FORWARD
+and
+.B PREROUTING
+chains). If the interface name ends in a "+", then any
+interface which begins with this name will match.
+.TP
+.B --physdev-out name
+Name of a bridge port via which a packet is going to be sent (for packets
+entering the
+.BR FORWARD ,
+.B OUTPUT
+and
+.B POSTROUTING
+chains). If the interface name ends in a "+", then any
+interface which begins with this name will match. Note that in the
+.BR nat " and " mangle
+.B OUTPUT
+chains one cannot match on the bridge output port, however one can in the
+.B "filter OUTPUT"
+chain.
+.SS pkttype
+This module matches the link-layer packet type.
+.TP
+.BI "--pkt-type " "[\fIunicast\fP|\fIbroadcast\fP|\fImulticast\fP]"
.SS state
This module, when combined with connection tracking, allows access to
the connection tracking state for this packet.
.TP
.BI "--state " "state"
Where state is a comma separated list of the connection states to
-match. Possible states are
-.B INVALID
-meaning that the packet is associated with no known connection,
-.B ESTABLISHED
-meaning that the packet is associated with a connection which has seen
-packets in both directions,
-.B NEW
-meaning that the packet has started a new connection, or otherwise
-associated with a connection which has not seen packets in both
-directions, and
-.B RELATED
-meaning that the packet is starting a new connection, but is
-associated with an existing connection, such as an FTP data transfer,
-or an ICMP error.
-.SS conntrack
-This module, when combined with connection tracking, allows access to
-more connection tracking information than the "state" match.
-(this module is present only if iptables was compiled under a kernel
-supporting this feature)
-.TP
-.BI "--ctstate " "state"
-Where state is a comma separated list of the connection states to
-match. Possible states are
+match. Possible states are
.B INVALID
meaning that the packet is associated with no known connection,
.B ESTABLISHED
@@ -577,52 +599,59 @@ directions, and
meaning that the packet is starting a new connection, but is
associated with an existing connection, such as an FTP data transfer,
or an ICMP error.
-.B SNAT
-A virtual state, matching if the original source address differs from
-the reply destination.
-.B DNAT
-A virtual state, matching if the original destination differs from the
-reply source.
-.TP
-.BI "--ctproto " "proto"
-Protocol to match (by number or name)
-.TP
-.BI "--ctorigsrc " "[!] \fIaddress\fP[/\fImask\fP]"
-Match against original source address
-.TP
-.BI "--ctorigdst " "[!] \fIaddress\fP[/\fImask\fP]"
-Match against original destination address
-.TP
-.BI "--ctreplsrc " "[!] \fIaddress\fP[/\fImask\fP]"
-Match against reply source address
+.SS tcp
+These extensions are loaded if `--protocol tcp' is specified. It
+provides the following options:
.TP
-.BI "--ctrepldst " "[!] \fIaddress\fB[/\fImask\fP]"
-Match against reply destination address
+.BR "--source-port " "[!] \fIport\fP[:\fIport\fP]"
+Source port or port range specification. This can either be a service
+name or a port number. An inclusive range can also be specified,
+using the format
+.IR port : port .
+If the first port is omitted, "0" is assumed; if the last is omitted,
+"65535" is assumed.
+If the second port greater then the first they will be swapped.
+The flag
+.B --sport
+is a convenient alias for this option.
.TP
-.BI "--ctstatus " "[\fINONE|EXPECTED|SEEN_REPLY|ASSURED\fP][,...]"
-Match against internal conntrack states
+.BR "--destination-port " "[!] \fIport\fP[:\fIport\fP]"
+Destination port or port range specification. The flag
+.B --dport
+is a convenient alias for this option.
.TP
-.BI "--ctexpire " "\fItime\fP[\fI:time\fP]"
-Match remaining lifetime in seconds against given value
-or range of values (inclusive)
-.SS dscp
-This module matches the 6 bit DSCP field within the TOS field in the
-IP header. DSCP has superseded TOS within the IETF.
+.BR "--tcp-flags " "[!] \fImask\fP \fIcomp\fP"
+Match when the TCP flags are as specified. The first argument is the
+flags which we should examine, written as a comma-separated list, and
+the second argument is a comma-separated list of flags which must be
+set. Flags are:
+.BR "SYN ACK FIN RST URG PSH ALL NONE" .
+Hence the command
+.br
+ iptables -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN,RST SYN
+.br
+will only match packets with the SYN flag set, and the ACK, FIN and
+RST flags unset.
.TP
-.BI "--dscp " "value"
-Match against a numeric (decimal or hex) value [0-32].
+.B "[!] --syn"
+Only match TCP packets with the SYN bit set and the ACK and RST bits
+cleared. Such packets are used to request TCP connection initiation;
+for example, blocking such packets coming in an interface will prevent
+incoming TCP connections, but outgoing TCP connections will be
+unaffected.
+It is equivalent to \fB--tcp-flags SYN,RST,ACK SYN\fP.
+If the "!" flag precedes the "--syn", the sense of the
+option is inverted.
.TP
-.BI "--dscp-class " "\fIDiffServ Class\fP"
-Match the DiffServ class. This value may be any of the
-BE, EF, AFxx or CSx classes. It will then be converted
-into it's according numeric value.
-.SS pkttype
-This module matches the link-layer packet type.
+.BR "--tcp-option " "[!] \fInumber\fP"
+Match if TCP option set.
.TP
-.BI "--pkt-type " "[\fIunicast\fP|\fIbroadcast\fP|\fImulticast\fP]"
+.BR "--mss " "\fIvalue\fP[:\fIvalue\fP]"
+Match TCP SYN or SYN/ACK packets with the specified MSS value (or range),
+which control the maximum packet size for that connection.
.SS tos
This module matches the 8 bits of Type of Service field in the IP
-header (ie. including the precedence bits).
+header (ie. including the precedence bits).
.TP
.BI "--tos " "tos"
The argument is either a standard name, (use
@@ -630,30 +659,77 @@ The argument is either a standard name, (use
iptables -m tos -h
.br
to see the list), or a numeric value to match.
-.SS ah
-This module matches the SPIs in AH header of IPSec packets.
-.TP
-.BR "--ahspi " "[!] \fIspi\fP[:\fIspi\fP]"
-.SS esp
-This module matches the SPIs in ESP header of IPSec packets.
-.TP
-.BR "--espspi " "[!] \fIspi\fP[:\fIspi\fP]"
-.SS length
-This module matches the length of a packet against a specific value
-or range of values.
-.TP
-.BR "--length " "\fIlength\fP[:\fIlength\fP]"
.SS ttl
This module matches the time to live field in the IP header.
.TP
.BI "--ttl " "ttl"
Matches the given TTL value.
+.SS udp
+These extensions are loaded if `--protocol udp' is specified. It
+provides the following options:
+.TP
+.BR "--source-port " "[!] \fIport\fP[:\fIport\fP]"
+Source port or port range specification.
+See the description of the
+.B --source-port
+option of the TCP extension for details.
+.TP
+.BR "--destination-port " "[!] \fIport\fP[:\fIport\fP]"
+Destination port or port range specification.
+See the description of the
+.B --destination-port
+option of the TCP extension for details.
.SS unclean
This module takes no options, but attempts to match packets which seem
malformed or unusual. This is regarded as experimental.
.SH TARGET EXTENSIONS
iptables can use extended target modules: the following are included
in the standard distribution.
+.SS DNAT
+This target is only valid in the
+.B nat
+table, in the
+.B PREROUTING
+and
+.B OUTPUT
+chains, and user-defined chains which are only called from those
+chains. It specifies that the destination address of the packet
+should be modified (and all future packets in this connection will
+also be mangled), and rules should cease being examined. It takes one
+type of option:
+.TP
+.BR "--to-destination " "\fIipaddr\fP[-\fIipaddr\fP][:\fIport\fP-\fIport\fP]"
+which can specify a single new destination IP address, an inclusive
+range of IP addresses, and optionally, a port range (which is only
+valid if the rule also specifies
+.B "-p tcp"
+or
+.BR "-p udp" ).
+If no port range is specified, then the destination port will never be
+modified.
+.TP
+You can add several --to-destination options. If you specify more
+than one destination address, either via an address range or multiple
+--to-destination options, a simple round-robin (one after another in
+cycle) load balancing takes place between these adresses.
+.SS DSCP
+This target allows to alter the value of the DSCP bits within the TOS
+header of the IPv4 packet. As this manipulates a packet, it can only
+be used in the mangle table.
+.TP
+.BI "--set-dscp " "value"
+Set the DSCP field to a numerical value (can be decimal or hex)
+.TP
+.BI "--set-dscp-class " "class"
+Set the DSCP field to a DiffServ class.
+.SS ECN
+This target allows to selectively work around known ECN blackholes.
+It can only be used in the mangle table.
+.TP
+.BI "--ecn-tcp-remove"
+Remove all ECN bits from the TCP header. Of course, it can only be used
+in conjunction with
+.BR "-p tcp" .
.SS LOG
Turn on kernel logging of matching packets. When this option is set
for a rule, the Linux kernel will print some information on all
@@ -690,9 +766,64 @@ packet. It is only valid in the
table. It can for example be used in conjunction with iproute2.
.TP
.BI "--set-mark " "mark"
+.SS MASQUERADE
+This target is only valid in the
+.B nat
+table, in the
+.B POSTROUTING
+chain. It should only be used with dynamically assigned IP (dialup)
+connections: if you have a static IP address, you should use the SNAT
+target. Masquerading is equivalent to specifying a mapping to the IP
+address of the interface the packet is going out, but also has the
+effect that connections are
+.I forgotten
+when the interface goes down. This is the correct behavior when the
+next dialup is unlikely to have the same interface address (and hence
+any established connections are lost anyway). It takes one option:
+.TP
+.BR "--to-ports " "\fIport\fP[-\fIport\fP]"
+This specifies a range of source ports to use, overriding the default
+.B SNAT
+source port-selection heuristics (see above). This is only valid
+if the rule also specifies
+.B "-p tcp"
+or
+.BR "-p udp" .
+.SS MIRROR
+This is an experimental demonstration target which inverts the source
+and destination fields in the IP header and retransmits the packet.
+It is only valid in the
+.BR INPUT ,
+.B FORWARD
+and
+.B PREROUTING
+chains, and user-defined chains which are only called from those
+chains. Note that the outgoing packets are
+.B NOT
+seen by any packet filtering chains, connection tracking or NAT, to
+avoid loops and other problems.
+.SS REDIRECT
+This target is only valid in the
+.B nat
+table, in the
+.B PREROUTING
+and
+.B OUTPUT
+chains, and user-defined chains which are only called from those
+chains. It alters the destination IP address to send the packet to
+the machine itself (locally-generated packets are mapped to the
+127.0.0.1 address). It takes one option:
+.TP
+.BR "--to-ports " "\fIport\fP[-\fIport\fP]"
+This specifies a destination port or range of ports to use: without
+this, the destination port is never altered. This is only valid
+if the rule also specifies
+.B "-p tcp"
+or
+.BR "-p udp" .
.SS REJECT
This is used to send back an error packet in response to the matched
-packet: otherwise it is equivalent to
+packet: otherwise it is equivalent to
.B DROP
so it is a terminating TARGET, ending rule traversal.
This target is only valid in the
@@ -705,7 +836,7 @@ chains. The following option controls the nature of the error packet
returned:
.TP
.BI "--reject-with " "type"
-The type given can be
+The type given can be
.BR icmp-net-unreachable ,
.BR icmp-host-unreachable ,
.BR icmp-port-unreachable ,
@@ -720,35 +851,10 @@ TCP RST packet to be sent back. This is mainly useful for blocking
.I ident
(113/tcp) probes which frequently occur when sending mail to broken mail
hosts (which won't accept your mail otherwise).
-.SS TOS
-This is used to set the 8-bit Type of Service field in the IP header.
-It is only valid in the
-.B mangle
-table.
-.TP
-.BI "--set-tos " "tos"
-You can use a numeric TOS values, or use
-.br
- iptables -j TOS -h
-.br
-to see the list of valid TOS names.
-.SS MIRROR
-This is an experimental demonstration target which inverts the source
-and destination fields in the IP header and retransmits the packet.
-It is only valid in the
-.BR INPUT ,
-.B FORWARD
-and
-.B PREROUTING
-chains, and user-defined chains which are only called from those
-chains. Note that the outgoing packets are
-.B NOT
-seen by any packet filtering chains, connection tracking or NAT, to
-avoid loops and other problems.
.SS SNAT
-This target is only valid in the
+This target is only valid in the
.B nat
-table, in the
+table, in the
.B POSTROUTING
chain. It specifies that the source address of the packet should be
modified (and all future packets in this connection will also be
@@ -771,102 +877,6 @@ You can add several --to-source options. If you specify more
than one source address, either via an address range or multiple
--to-source options, a simple round-robin (one after another in
cycle) takes place between these adresses.
-.SS DNAT
-This target is only valid in the
-.B nat
-table, in the
-.B PREROUTING
-and
-.B OUTPUT
-chains, and user-defined chains which are only called from those
-chains. It specifies that the destination address of the packet
-should be modified (and all future packets in this connection will
-also be mangled), and rules should cease being examined. It takes one
-type of option:
-.TP
-.BR "--to-destination " "\fIipaddr\fP[-\fIipaddr\fP][:\fIport\fP-\fIport\fP]"
-which can specify a single new destination IP address, an inclusive
-range of IP addresses, and optionally, a port range (which is only
-valid if the rule also specifies
-.B "-p tcp"
-or
-.BR "-p udp" ).
-If no port range is specified, then the destination port will never be
-modified.
-.TP
-You can add several --to-destination options. If you specify more
-than one destination address, either via an address range or multiple
---to-destination options, a simple round-robin (one after another in
-cycle) load balancing takes place between these adresses.
-.SS MASQUERADE
-This target is only valid in the
-.B nat
-table, in the
-.B POSTROUTING
-chain. It should only be used with dynamically assigned IP (dialup)
-connections: if you have a static IP address, you should use the SNAT
-target. Masquerading is equivalent to specifying a mapping to the IP
-address of the interface the packet is going out, but also has the
-effect that connections are
-.I forgotten
-when the interface goes down. This is the correct behavior when the
-next dialup is unlikely to have the same interface address (and hence
-any established connections are lost anyway). It takes one option:
-.TP
-.BR "--to-ports " "\fIport\fP[-\fIport\fP]"
-This specifies a range of source ports to use, overriding the default
-.B SNAT
-source port-selection heuristics (see above). This is only valid
-if the rule also specifies
-.B "-p tcp"
-or
-.BR "-p udp" .
-.SS REDIRECT
-This target is only valid in the
-.B nat
-table, in the
-.B PREROUTING
-and
-.B OUTPUT
-chains, and user-defined chains which are only called from those
-chains. It alters the destination IP address to send the packet to
-the machine itself (locally-generated packets are mapped to the
-127.0.0.1 address). It takes one option:
-.TP
-.BR "--to-ports " "\fIport\fP[-\fIport\fP]"
-This specifies a destination port or range of ports to use: without
-this, the destination port is never altered. This is only valid
-if the rule also specifies
-.B "-p tcp"
-or
-.BR "-p udp" .
-.SS ULOG
-This target provides userspace logging of matching packets. When this
-target is set for a rule, the Linux kernel will multicast this packet
-through a
-.IR netlink
-socket. One or more userspace processes may then subscribe to various
-multicast groups and receive the packets.
-Like LOG, this is a "non-terminating target", i.e. rule traversal
-continues at the next rule.
-.TP
-.BI "--ulog-nlgroup " "nlgroup"
-This specifies the netlink group (1-32) to which the packet is sent.
-Default value is 1.
-.TP
-.BI "--ulog-prefix " "prefix"
-Prefix log messages with the specified prefix; up to 32 characters
-long, and useful for distinguishing messages in the logs.
-.TP
-.BI "--ulog-cprange " "size"
-Number of bytes to be copied to userspace. A value of 0 always copies
-the entire packet, regardless of its size. Default is 0.
-.TP
-.BI "--ulog-qthreshold " "size"
-Number of packet to queue inside kernel. Setting this value to, e.g. 10
-accumulates ten packets inside the kernel and transmits them as one
-netlink multipart message to userspace. Default is 1 (for backwards
-compatibility).
.SS TCPMSS
This target allows to alter the MSS value of TCP SYN packets, to control
the maximum size for that connection (usually limiting it to your
@@ -900,24 +910,45 @@ Explicitly set MSS option to specified value.
Automatically clamp MSS value to (path_MTU - 40).
.TP
These options are mutually exclusive.
-.SS DSCP
-This target allows to alter the value of the DSCP bits within the TOS
-header of the IPv4 packet. As this manipulates a packet, it can only
-be used in the mangle table.
+.SS TOS
+This is used to set the 8-bit Type of Service field in the IP header.
+It is only valid in the
+.B mangle
+table.
.TP
-.BI "--set-dscp " "value"
-Set the DSCP field to a numerical value (can be decimal or hex)
+.BI "--set-tos " "tos"
+You can use a numeric TOS values, or use
+.br
+ iptables -j TOS -h
+.br
+to see the list of valid TOS names.
+.SS ULOG
+This target provides userspace logging of matching packets. When this
+target is set for a rule, the Linux kernel will multicast this packet
+through a
+.IR netlink
+socket. One or more userspace processes may then subscribe to various
+multicast groups and receive the packets.
+Like LOG, this is a "non-terminating target", i.e. rule traversal
+continues at the next rule.
.TP
-.BI "--set-dscp-class " "class"
-Set the DSCP field to a DiffServ class.
-.SS ECN
-This target allows to selectively work around known ECN blackholes.
-It can only be used in the mangle table.
+.BI "--ulog-nlgroup " "nlgroup"
+This specifies the netlink group (1-32) to which the packet is sent.
+Default value is 1.
.TP
-.BI "--ecn-tcp-remove"
-Remove all ECN bits from the TCP header. Of course, it can only be used
-in conjunction with
-.BR "-p tcp" .
+.BI "--ulog-prefix " "prefix"
+Prefix log messages with the specified prefix; up to 32 characters
+long, and useful for distinguishing messages in the logs.
+.TP
+.BI "--ulog-cprange " "size"
+Number of bytes to be copied to userspace. A value of 0 always copies
+the entire packet, regardless of its size. Default is 0.
+.TP
+.BI "--ulog-qthreshold " "size"
+Number of packet to queue inside kernel. Setting this value to, e.g. 10
+accumulates ten packets inside the kernel and transmits them as one
+netlink multipart message to userspace. Default is 1 (for backwards
+compatibility).
.br
.SH DIAGNOSTICS
Various error messages are printed to standard error. The exit code
@@ -928,10 +959,10 @@ other errors cause an exit code of 1.
Bugs? What's this? ;-)
Well... the counters are not reliable on sparc64.
.SH COMPATIBILITY WITH IPCHAINS
-This
+This
.B iptables
is very similar to ipchains by Rusty Russell. The main difference is
-that the chains
+that the chains
.B INPUT
and
.B OUTPUT
@@ -940,7 +971,7 @@ originating from the local host respectively. Hence every packet only
passes through one of the three chains; previously a forwarded packet
would pass through all three.
.PP
-The other main difference is that
+The other main difference is that
.B -i
refers to the input interface;
.B -o
@@ -967,7 +998,7 @@ There are several other changes in iptables.
.BR iptables-restore (8),
.BR ip6tables (8),
.BR ip6tables-save (8),
-.BR ip6tables-restore(8).
+.BR ip6tables-restore (8).
.P
The packet-filtering-HOWTO details iptables usage for
packet filtering, the NAT-HOWTO details NAT,