INTEGER TYPE ~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |Integer | integer | variable | - |=================== The integer type is used for numeric values. It may be specified as a decimal, hexadecimal or octal number. The integer type does not have a fixed size, its size is determined by the expression for which it is used. BITMASK TYPE ~~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |Bitmask | bitmask | variable | integer |=================== The bitmask type (*bitmask*) is used for bitmasks. STRING TYPE ~~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |String | string | variable | - |=================== The string type is used for character strings. A string begins with an alphabetic character (a-zA-Z) followed by zero or more alphanumeric characters or the characters /, -, _ and .. In addition, anything enclosed in double quotes (") is recognized as a string. .String specification ---------------------- # Interface name filter input iifname eth0 # Weird interface name filter input iifname "(eth0)" ---------------------------- LINK LAYER ADDRESS TYPE ~~~~~~~~~~~~~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |Link layer address | lladdr| variable | integer |=================== The link layer address type is used for link layer addresses. Link layer addresses are specified as a variable amount of groups of two hexadecimal digits separated using colons (:). .Link layer address specification ---------------------- # Ethernet destination MAC address filter input ether daddr 20:c9:d0:43:12:d9 ---------------------------- IPV4 ADDRESS TYPE ~~~~~~~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |IPV4 address| ipv4_addr| 32 bit| integer |=================== The IPv4 address type is used for IPv4 addresses. Addresses are specified in either dotted decimal, dotted hexadecimal, dotted octal, decimal, hexadecimal, octal notation or as a host name. A host name will be resolved using the standard system resolver. .IPv4 address specification ---------------------- # dotted decimal notation filter output ip daddr 127.0.0.1 # host name filter output ip daddr localhost ---------------------------- IPV6 ADDRESS TYPE ~~~~~~~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |IPv6 address| ipv6_addr| 128 bit| integer |=================== The IPv6 address type is used for IPv6 addresses. Addresses are specified as a host name or as hexadecimal halfwords separated by colons. Addresses might be enclosed in square brackets ("[]") to differentiate them from port numbers. .IPv6 address specification ---------------------- # abbreviated loopback address filter output ip6 daddr ::1 ---------------------------- .IPv6 address specification with bracket notation ---------------------- # without [] the port number (22) would be parsed as part of the # ipv6 address ip6 nat prerouting tcp dport 2222 dnat to [1ce::d0]:22 ---------------------------- BOOLEAN TYPE ~~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |Boolean | boolean | 1 bit | integer |=================== The boolean type is a syntactical helper type in userspace. Its use is in the right-hand side of a (typically implicit) relational expression to change the expression on the left-hand side into a boolean check (usually for existence). + .The following keywords will automatically resolve into a boolean type with given value [options="header"] |================== |Keyword | Value |exists | 1 | missing | 0 |=================== .expressions support a boolean comparison [options="header"] |====================================== |Expression | Behaviour |fib | Check route existence. |exthdr| Check IPv6 extension header existence. |tcp option | Check TCP option header existence. |=================== .Boolean specification ---------------------- # match if route exists filter input fib daddr . iif oif exists # match only non-fragmented packets in IPv6 traffic filter input exthdr frag missing # match if TCP timestamp option is present filter input tcp option timestamp exists ------------------------------------------ ICMP TYPE TYPE ~~~~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |ICMP Type | icmp_type | 8 bit | integer |=================== The ICMP Type type is used to conveniently specify the ICMP header's type field. .Keywords may be used when specifying the ICMP type [options="header"] |================== |Keyword | Value |echo-reply | 0 |destination-unreachable | 3 |source-quench| 4 |redirect| 5 |echo-request| 8 |router-advertisement| 9 |router-solicitation| 10 |time-exceeded| 11 |parameter-problem| 12 |timestamp-request| 13 |timestamp-reply| 14 |info-request| 15 |info-reply| 16 |address-mask-request| 17 |address-mask-reply| 18 |=================== .ICMP Type specification ------------------------ # match ping packets filter output icmp type { echo-request, echo-reply } ------------------------ ICMP CODE TYPE ~~~~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |ICMP Code | icmp_code | 8 bit | integer |=================== The ICMP Code type is used to conveniently specify the ICMP header's code field. .Keywords may be used when specifying the ICMP code [options="header"] |================== |Keyword | Value |net-unreachable | 0 |host-unreachable | 1 |prot-unreachable| 2 |port-unreachable| 3 |net-prohibited| 9 |host-prohibited| 10 |admin-prohibited| 13 |=================== ICMPV6 TYPE TYPE ~~~~~~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |ICMPv6 Type | icmpx_code | 8 bit | integer |=================== The ICMPv6 Type type is used to conveniently specify the ICMPv6 header's type field. .keywords may be used when specifying the ICMPv6 type: [options="header"] |================== |Keyword | Value |destination-unreachable | 1 |packet-too-big| 2 |time-exceeded| 3 |parameter-problem| 4 |echo-request| 128 |echo-reply| 129 |mld-listener-query| 130 |mld-listener-report| 131 |mld-listener-done | 132 |mld-listener-reduction| 132 |nd-router-solicit | 133 |nd-router-advert| 134 |nd-neighbor-solicit| 135 |nd-neighbor-advert| 136 |nd-redirect| 137 |router-renumbering| 138 |ind-neighbor-solicit| 141 |ind-neighbor-advert| 142 |mld2-listener-report| 143 |=================== .ICMPv6 Type specification -------------------------- # match ICMPv6 ping packets filter output icmpv6 type { echo-request, echo-reply } -------------------------- ICMPV6 CODE TYPE ~~~~~~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |ICMPv6 Code | icmpv6_code | 8 bit | integer |=================== The ICMPv6 Code type is used to conveniently specify the ICMPv6 header's code field. .keywords may be used when specifying the ICMPv6 code [options="header"] |================== |Keyword |Value |no-route| 0 |admin-prohibited| 1 |addr-unreachable| 3 |port-unreachable| 4 |policy-fail| 5 |reject-route| 6 |================== ICMPVX CODE TYPE ~~~~~~~~~~~~~~~~ [options="header"] |================== |Name | Keyword | Size | Base type |ICMPvX Code | icmpv6_type | 8 bit | integer |=================== The ICMPvX Code type abstraction is a set of values which overlap between ICMP and ICMPv6 Code types to be used from the inet family. .keywords may be used when specifying the ICMPvX code [options="header"] |================== |Keyword |Value |no-route| 0 |port-unreachable| 1 |host-unreachable| 2 |admin-prohibited| 3 |================= CONNTRACK TYPES ~~~~~~~~~~~~~~~ .overview of types used in ct expression and statement [options="header"] |================== |Name | Keyword |Size |Base type |conntrack state| ct_state| 4 byte| bitmask |conntrack direction| ct_dir | 8 bit| integer |conntrack status| ct_status| 4 byte| bitmask |conntrack event bits| ct_event | 4 byte | bitmask |conntrack label| ct_label | 128 bit| bitmask |================= For each of the types above, keywords are available for convenience: .conntrack state (ct_state) [options="header"] |================== |Keyword| Value |invalid| 1 |established| 2 |related| 4 |new| 8 |untracked| 64 |================ .conntrack direction (ct_dir) [options="header"] |================== |Keyword| Value |original| 0 |reply| 1 |================ .conntrack status (ct_status) [options="header"] |================== |Keyword| Value |expected| 1 |seen-reply| 2 |assured| 4 |confirmed| 8 |snat| 16 |dnat| 32 |dying| 512 |================ .conntrack event bits (ct_event) [options="header"] |================== |Keyword| Value |new| 1 |related| 2 |destroy| 4 |reply| 8 |assured| 16 |protoinfo| 32 |helper| 64 |mark| 128 |seqadj| 256 |secmark| 512 |label| 1024 |================== Possible keywords for conntrack label type (ct_label) are read at runtime from /etc/connlabel.conf.