diff options
Diffstat (limited to 'include/linux/can/netlink.h')
| -rw-r--r-- | include/linux/can/netlink.h | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h new file mode 100644 index 0000000..02ec32d --- /dev/null +++ b/include/linux/can/netlink.h @@ -0,0 +1,185 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * linux/can/netlink.h + * + * Definitions for the CAN netlink interface + * + * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UAPI_CAN_NETLINK_H +#define _UAPI_CAN_NETLINK_H + +#include <linux/types.h> + +/* + * CAN bit-timing parameters + * + * For further information, please read chapter "8 BIT TIMING + * REQUIREMENTS" of the "Bosch CAN Specification version 2.0" + * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf. + */ +struct can_bittiming { + __u32 bitrate; /* Bit-rate in bits/second */ + __u32 sample_point; /* Sample point in one-tenth of a percent */ + __u32 tq; /* Time quanta (TQ) in nanoseconds */ + __u32 prop_seg; /* Propagation segment in TQs */ + __u32 phase_seg1; /* Phase buffer segment 1 in TQs */ + __u32 phase_seg2; /* Phase buffer segment 2 in TQs */ + __u32 sjw; /* Synchronisation jump width in TQs */ + __u32 brp; /* Bit-rate prescaler */ +}; + +/* + * CAN hardware-dependent bit-timing constant + * + * Used for calculating and checking bit-timing parameters + */ +struct can_bittiming_const { + char name[16]; /* Name of the CAN controller hardware */ + __u32 tseg1_min; /* Time segment 1 = prop_seg + phase_seg1 */ + __u32 tseg1_max; + __u32 tseg2_min; /* Time segment 2 = phase_seg2 */ + __u32 tseg2_max; + __u32 sjw_max; /* Synchronisation jump width */ + __u32 brp_min; /* Bit-rate prescaler */ + __u32 brp_max; + __u32 brp_inc; +}; + +/* + * CAN clock parameters + */ +struct can_clock { + __u32 freq; /* CAN system clock frequency in Hz */ +}; + +/* + * CAN operational and error states + */ +enum can_state { + CAN_STATE_ERROR_ACTIVE = 0, /* RX/TX error count < 96 */ + CAN_STATE_ERROR_WARNING, /* RX/TX error count < 128 */ + CAN_STATE_ERROR_PASSIVE, /* RX/TX error count < 256 */ + CAN_STATE_BUS_OFF, /* RX/TX error count >= 256 */ + CAN_STATE_STOPPED, /* Device is stopped */ + CAN_STATE_SLEEPING, /* Device is sleeping */ + CAN_STATE_MAX +}; + +/* + * CAN bus error counters + */ +struct can_berr_counter { + __u16 txerr; + __u16 rxerr; +}; + +/* + * CAN controller mode + */ +struct can_ctrlmode { + __u32 mask; + __u32 flags; +}; + +#define CAN_CTRLMODE_LOOPBACK 0x01 /* Loopback mode */ +#define CAN_CTRLMODE_LISTENONLY 0x02 /* Listen-only mode */ +#define CAN_CTRLMODE_3_SAMPLES 0x04 /* Triple sampling mode */ +#define CAN_CTRLMODE_ONE_SHOT 0x08 /* One-Shot mode */ +#define CAN_CTRLMODE_BERR_REPORTING 0x10 /* Bus-error reporting */ +#define CAN_CTRLMODE_FD 0x20 /* CAN FD mode */ +#define CAN_CTRLMODE_PRESUME_ACK 0x40 /* Ignore missing CAN ACKs */ +#define CAN_CTRLMODE_FD_NON_ISO 0x80 /* CAN FD in non-ISO mode */ +#define CAN_CTRLMODE_CC_LEN8_DLC 0x100 /* Classic CAN DLC option */ +#define CAN_CTRLMODE_TDC_AUTO 0x200 /* CAN transiver automatically calculates TDCV */ +#define CAN_CTRLMODE_TDC_MANUAL 0x400 /* TDCV is manually set up by user */ + +/* + * CAN device statistics + */ +struct can_device_stats { + __u32 bus_error; /* Bus errors */ + __u32 error_warning; /* Changes to error warning state */ + __u32 error_passive; /* Changes to error passive state */ + __u32 bus_off; /* Changes to bus off state */ + __u32 arbitration_lost; /* Arbitration lost errors */ + __u32 restarts; /* CAN controller re-starts */ +}; + +/* + * CAN netlink interface + */ +enum { + IFLA_CAN_UNSPEC, + IFLA_CAN_BITTIMING, + IFLA_CAN_BITTIMING_CONST, + IFLA_CAN_CLOCK, + IFLA_CAN_STATE, + IFLA_CAN_CTRLMODE, + IFLA_CAN_RESTART_MS, + IFLA_CAN_RESTART, + IFLA_CAN_BERR_COUNTER, + IFLA_CAN_DATA_BITTIMING, + IFLA_CAN_DATA_BITTIMING_CONST, + IFLA_CAN_TERMINATION, + IFLA_CAN_TERMINATION_CONST, + IFLA_CAN_BITRATE_CONST, + IFLA_CAN_DATA_BITRATE_CONST, + IFLA_CAN_BITRATE_MAX, + IFLA_CAN_TDC, + IFLA_CAN_CTRLMODE_EXT, + + /* add new constants above here */ + __IFLA_CAN_MAX, + IFLA_CAN_MAX = __IFLA_CAN_MAX - 1 +}; + +/* + * CAN FD Transmitter Delay Compensation (TDC) + * + * Please refer to struct can_tdc_const and can_tdc in + * include/linux/can/bittiming.h for further details. + */ +enum { + IFLA_CAN_TDC_UNSPEC, + IFLA_CAN_TDC_TDCV_MIN, /* u32 */ + IFLA_CAN_TDC_TDCV_MAX, /* u32 */ + IFLA_CAN_TDC_TDCO_MIN, /* u32 */ + IFLA_CAN_TDC_TDCO_MAX, /* u32 */ + IFLA_CAN_TDC_TDCF_MIN, /* u32 */ + IFLA_CAN_TDC_TDCF_MAX, /* u32 */ + IFLA_CAN_TDC_TDCV, /* u32 */ + IFLA_CAN_TDC_TDCO, /* u32 */ + IFLA_CAN_TDC_TDCF, /* u32 */ + + /* add new constants above here */ + __IFLA_CAN_TDC, + IFLA_CAN_TDC_MAX = __IFLA_CAN_TDC - 1 +}; + +/* + * IFLA_CAN_CTRLMODE_EXT nest: controller mode extended parameters + */ +enum { + IFLA_CAN_CTRLMODE_UNSPEC, + IFLA_CAN_CTRLMODE_SUPPORTED, /* u32 */ + + /* add new constants above here */ + __IFLA_CAN_CTRLMODE, + IFLA_CAN_CTRLMODE_MAX = __IFLA_CAN_CTRLMODE - 1 +}; + +/* u16 termination range: 1..65535 Ohms */ +#define CAN_TERMINATION_DISABLED 0 + +#endif /* !_UAPI_CAN_NETLINK_H */ |